Bedienungsanleitung Braun 7781 w d xpressive (Seite 15 von 112) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

428945

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

comfort, ensure that the hair is at the

optimum length of 2-5 mm.

Before epilating, thoroughly clean the

respective area to remove residues (like

deodorant). Then carefully dab dry with

a towel. When epilating the underarm,

keep your arm raised up so that the skin

is stretched and guide the appliance in

different directions. As skin may be more

sensitive directly after epilation, avoid

using irritating substances such as deo-

dorants with alcohol.

5 Facial epilation

Place the precision cap (9) onto the

epilation head (2) and your Silk·épil is

perfectly suited for conveniently removing

any unwanted hair from the face or other

sensitive areas.

Prior to epilation, we recommend cleaning

the skin with alcohol to promote good

hygiene.

When epilating the face, stretch the skin

with one hand and slowly guide the

epilator with your other hand the direction

of the switch.

Overheating protection

As a safety feature to avoid the unlikely event

of the appliance overheating, it may happen

that the appliance automatically turns off and

the charging lights flash (red/green). In this

case, turn the switch back to position «0»

and let the appliance cool down.

Cleaning the epilation head

Regular cleaning ensures better performance.

Brush cleaning:

6 Remove the cap and brush it out.

7 Thoroughly clean the tweezers from the

rear side of the epilator head with the

brush dipped into alcohol. While doing so,

turn the tweezer element manually. This

cleaning method ensures best hygienic

conditions for the epilation head.

Cleaning under running water:

8 Remove the cap. Hold the appliance with

the epilation head under running water.

Then press the release button (6) to

remove the epilation head (2).

Thoroughly shake both, the epilation

head and the appliance to make sure that

remaining water can drip out. Leave both

parts to dry. Before reattaching, make sure

that they are completely dry.

B Using the shaver head

attachment

a OptiTrim comb

b Shaver foil

c Trimmer

d Release buttons

e Trim/shave selector

f Cutter block

g Shaver head base

Shaving

Put on the shaver head attachment (10) by

clicking it in.

Pressing one of the lock keys, turn the

switch clockwise to setting 2.

Make sure the trim/shave selector is in the

«shave» position.

For best results, always make sure that

both, the shaver foil (b) and the trimmer (c)

are in contact with the skin (A). Keeping

your skin stretched (B), slowly move the

appliance against the direction of hair

growth. The trimmer first raises all long

hairs and cuts them off. Then the flexible

foil follows to smooth away any stubble.

•

98642722_SE_7781_WD_MN.indd 1598642722_SE_7781_WD_MN.indd 15 24.07.2008 10:31:22 Uhr24.07.2008 10:31:22 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun 7781 w d xpressive Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info