Bedienungsanleitung Braun 7781 wd xpressive easy start body face (Seite 16 von 106) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

428955

Zoom out

Zoom in

Vorherige Seite

1/106

Nächste Seite

When shaving or trimming in sensitive

areas, make sure that you always keep

your skin stretched to avoid injuries.

Contour trimming

For trimming precise line and contours, lock

the long hair trimmer by sliding the trim/

shave selector (e) to the position «trim» (C1).

Pre-cutting hair for epilation

If you choose to pre-cut your hair to the ideal

length for epilation, place the OptiTrim comb

(a) onto the shaver head. Slide the trim/shave

selector to the «trim» position.

Hold the appliance with the OptiTrim comb

lying flat on the skin. Guide it with the comb

tips against the hair growth as shown in

illustration C2.

N.B. As hair does not always grow in the

same direction, also guide the appliance

slightly diagonally or in different directions in

order to achieve best results.

Cleaning the shaver head

After each use, unplug the appliance.

Brush cleaning

Press the release buttons (d) to remove the

shaver head (D1). Tap the bottom of the

shaver head gently on a flat surface (not on

the foil).

Brush out the cutter block and the inside

of the shaver head. However, do not clean

the shaver foil with the brush as this may

damage the foil.

Cleaning with water

Press the release buttons (d) to remove the

shaver head. Rinse the shaver head and the

cutter block separately under running water

•

(D2). Leave the cutter block and the foil frame

to dry separately before reattaching them.

Keeping your shaver head attachment in

top shape

The shaving parts need to be lubricated

regularly every 3 months (E). If you clean

the shaver head under running water,

please lubricate it after every cleaning.

Apply some light machine oil or vaseline to

the shaver foil and the metal parts of the

long hair trimmer. Then remove the shaver

head and also apply a tiny amount of

vaseline as shown in picture section (E).

The shaver foil and the cutter block are

precision parts that wear out with time. To

maintain optimum shaving performance,

replace your foil and cutter block when you

notice a reduced shaving performance.

Do not shave with a damaged foil or cord.

How to replace the shaving parts

Shaver foil: Press the release buttons to

remove the shaver head. To remove the

shaver foil, press the foil frame (F). To

mount a new one, insert it from inside the

shaver head.

Cutter block: To remove the cutter block,

press and turn it 90° (G1), then take it off.

To put on a new cutter block, press it onto

the cutter block holder and turn 90° (G2).

Replacements parts (shaver foil, cutter block)

can be obtained from your retailer or Braun

Customer Service Centres.

For electric specifications, please see printing

on the special cord set. The special cord set

automatically adapts to any worldwide AC

voltage.

•

98759907_SE_7681_MN.indd 1698759907_SE_7681_MN.indd 16 02.07.2008 15:55:52 Uhr02.07.2008 15:55:52 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun 7781 wd xpressive easy start body face Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info