Bedienungsanleitung Braun 7951 Silk Epil 7 (Seite 8 von 49) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

548547

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

II Exfoliation

Exfoliation tips

The exfoliation brush (10a) has been developed

for full body usage, especially for legs, arms and

décolletage. It has not been designed for usage

in the face. The gentle brushing action with more

than 3000 micro-vibrations per minute effectively

removes dry skin cells for a visibly improved skin

appearance.

You can use the exfoliation brush on a weekly

basis on dry or wet skin during your shower

routine.

However, when using it in the bathtub, do not

immerse it fully in water since this will not provide

optimal exfoliation results.

Using the brush on wet skin provides 4 times

better exfoliation results than a manually applied

cosmetic exfoliation product alone.

For best exfoliation results, extra comfort and a

pampering experience, we recommend to use

the brush on wet skin with your preferred body

scrub or shower gel.

How to exfoliate

Click the exfoliation brush (10a) onto to the brush

adapter (10).

Click the brush adapter onto the appliance.

A Select speed «I» for sensitive skin areas, speed

«II» for normal skin.

B Slowly guide the exfoliation brush in circular

movements over your skin to gently refine it.

Avoid holding the brush on the same skin area

for prolonged time. Do not use the exfoliation

brush on your face.

The regular use of the exfoliation brush (e.g.

once a week) helps minimizing the risk of in-

grown hairs: Dead skin cells are removed so

that fine, re-growing hairs can easily get

through to the skin surface. We recommend

that you exfoliate at least 1–2 days before you

want to epilate.

C Cleaning the exfoliation brush

After use, rinse the exfoliation brush under

running water.

If needed, you may use some liquid soap to

thoroughly clean it.

Shake the brush to remove excess water and

leave it to dry.

Attach the protective cover (10b) before storing

the brush.

D Replacing the exfoliation brush

With weekly use, we recommend that you

replace the brush unit (10a) after 12 months.

Brush refills (ref. no. 79 Spa) are available from

your retailer or Braun Service Centres or via

www.service.braun.com.

III Shaving

With the shaver head (11) attached, use the

appliance on dry skin only.

How to shave

• Click on the shaver head.

• Make sure the trim/shave selector is in the « »

position.

• Select speed «II».

For best results, always make sure that both, the

shaver foil (b) and the trimmer (c) are in contact

with the skin (A). Keeping your skin stretched (B),

slowly move the appliance against the direction of

hair growth. The trimmer first raises all long hairs

and cuts them off. Then the flexible foil follows

to smooth away any stubble. When shaving or

trimming in sensitive areas, make sure that you

always keep your skin stretched to avoid injuries.

Contour trimming

For trimming precise line and contours, lock the

long hair trimmer by sliding the trim/shave selector

(e) to the position «

» (C1).

Pre-cutting hair

If you choose to pre-cut your hair to the ideal

length for epilation, place the trimmer cap (11a)

onto the shaver head. Slide the trim/shave

selector to the « » position.

Hold the appliance with the trimmer cap lying flat

on the skin. Guide it with the comb tips against

the hair growth (C2).

Since hairs usually grow in various directions,

guide the appliance slightly diagonally or in different

directions in order to achieve best results.

Cleaning the shaver head

Cleaning with the cleaning brush (D1)

• Press the release buttons (11d) to remove the

shaver head. Tap the bottom of the shaver head

gently on a flat surface (not on the foil).

• Brush out the cutter block and the inside of the

shaver head. However, do not clean the shaver

foil with the brush as this may damage the foil.

Cleaning with water (D2)

Press the release buttons (d) to remove the

shaver head. Rinse the shaver head and the cutter

block separately under running water. Leave the

cutter block and the foil frame to dry separately

before reattaching them.

Keeping your shaver head attachment in top

condition

• The shaving parts need to be lubricated

regularly every 3 months. If you clean the shaver

head under running water, please lubricate it

after every cleaning.

• Apply some light machine oil or vaseline to the

shaver foil and the metal parts of the long hair

trimmer (E). Then remove the shaver head and

also apply a tiny amount of vaseline as shown in

picture.

• The shaver foil and the cutter block are precision

parts that wear out with time. To maintain

optimal shaving performance, replace your foil

and cutter block when you notice a reduced

92193506_SE7951_CEE_S6-52.indd 892193506_SE7951_CEE_S6-52.indd 8 26.07.12 14:4726.07.12 14:47

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun 7951 Silk Epil 7 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info