Bedienungsanleitung Braun BGK 7050 - 5377 (Seite 13 von 78) (Alle Sprachen)

695626

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

Overheating protection

As a safety feature to avoid the unlikely event of the appliance overheating, it may

happen that the charging light shines red for 8 seconds and then the appliance turns

off automatically. In this case, turn the switch back to the position 0 (off) and let the

appliance cool down.

How to operate the appliance

Switch on the appliance by pressing a lock key (4a) and turning the switch (4) clockwise

to position «I» or «II». The Smartlight (3) shines as long as the appliance is switched on.

This provides better visibility of fine hairs or skin. To remove the epilation head, press the

release button (6). To change caps (1a), (1b) or (8), press their lateral ribs and pull off.

Usage of the epilation head (A)

Useful tips

• If you have not used an epilator before, or if you have not epilated for a longer period

of time, it may take a short time for your skin to adapt to epilation. The discomfort

experienced in the beginning will decrease considerably with repeated use as the skin

adapts to the process.

• When epilating for the first time, it is advisable to epilate in the evening, so that any

possible reddening can disappear overnight. To relax the skin we recommend

applying a moisture cream after epilation.

• Epilation is easier and more comfortable when the hair is at the optimum length of

2-5 mm. If hairs are longer, you can pre-cut the hairs to 5 mm length using the shaver

head with trimmer cap.

• Fine, regrowing hairs might not grow up to the skin surface. The regular use of

massage sponges (e.g. after showering) or exfoliation peelings helps to prevent

in-grown hair as the gentle scrubbing action removes the upper skin layer and fine

hair can get through to the skin surface.

• Dry usage: Your skin must be dry and free from grease or cream.

• Wet usage: The appliance can be used on wet skin, even under running water. Make

sure that the skin is very moist in order to achieve optimum gliding conditions for the

appliance. After each wet usage, clean the appliance under running water.

How to epilate

Before use, always make sure that the epilation head (2) is clean and provided with

a cap (1a or 1b).

Speed selection

Select speed «I» for a gentle epilation and speed «II» for an efficient epilation.

Handling

Always stretch your skin when epilating. Make sure that the epilation area is in contact

with your skin.

Guide the appliance in a slow, continuous movement, without pressure against the hair

growth, in the direction of the switch. As hair can grow in different directions, it may also

be helpful to guide the appliance in different directions to achieve optimum results.

The massage cap (1a) ensures best skin comfort during epilation. If you are used to the

97246809_BGK_7050_MN_S6-80.indd 1397246809_BGK_7050_MN_S6-80.indd 13 21.07.15 10:3421.07.15 10:34

CSS APPROVED Effective Date 23Jul2015 GMT - Printed 24Nov2015 Page 13 of 80

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun BGK 7050 - 5377 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info