Bedienungsanleitung Braun BP5900 (Seite 5 von 61) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

445346

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

Morning Average (for BP5900 only)

• Press the “Average ” (3) button again into “Morning

Average ” mode, the morning measurements

in memory within past 7 days will show on LCD.

• If there is no data in memory within past 7

days, “ ” will show on LCD.

Evening Average (for BP5900 only)

• Press the “Average ” (3) button once again into “Evening

Average ” mode, the evening measurements in memory

within past 7 days will show on LCD.

• If there is no data in memory within past 7 days, “

” will

show on LCD.

Erasing Data

• Press the “Memory

” (2) button into Memory mode.

• Press and hold the “Mode

” (5) button and then press the

“Set ” (4) button, all the stored data will be erased and

CLR will show on screen.

• To check if the data was erased, press the “Memory

” (2)

button. No data should show up on screen, but date, time

and M:00.

Morning Hypertension Setting (for BP5900 only)

Morning Hypertension symbol will appear when Morning Average is above your

pre-congured Systolic rate and/or pre-congured Diastolic rate, AND/OR one or both of

these measurements is 20% or more above Evening Average.

** Your pre-congured Systolic / Diastolic should be decided between you and your

doctor or healthcare provider.

• After setting Date and Time, press “Mode

” (5) button into

“Morning Hypertension ” setting mode “- - ” on Systolic

position will ash for Systolic setting.

• Press “SET

” (4) button, LCD will appear 135 mmHg for SYS

as the internal pre-set value, then press “Set ” button

repeatedly to set his own value (Range from 70~250 mmHg)

• Press “Mode

” (5) button again into “Morning Hypertension

” setting mode “ - - ” on Diastolic position will ash for

Diastolic setting.

• Press “SET

” (4) button, LCD will appear 85 mmHg for DIA as

the internal pre-set value, then user presses “SET ” button to

set his own value (Range for DIA is 40 ~ 115 mmHg).

• User can press START/STOP

(1) button to exit setting mode

and go back to standby at any step.

Irregular Heart Beat Detector (for BP5900 only)

The appearance of this symbol signies that a certain pulse irregularity was detected

during the measurement. Talking, moving, shaking or an irregular pulse during the

measurement can result in the appearance of this icon. Usually this is not a cause for concern,

however if the symbol appears often, we recommend you seek medical advice. The device does

not replace a cardiac examination, but service to detect pulse irregularities at an early stage.

Low Battery Indicator

When the low battery indicator ashes on the display, it means the battery is low and

the four batteries need to be replaced with Alkaline LR6 (AA) batteries.

** After replacing batteries, BPM will go into TIME-SETTING mode automatically and show the

last measurement time on screen. Please SET the current DATE / TIME before taking the next

measurement to get correct AVERAGE result.

Storage and Cleaning

• Always keep the unit in the carrying case after its use.

• Do not put the item directly under the sunlight, in high temperature or humid and dusty

places.

• Do not store in extremely low (less than -20°C) or high (more than 60°C) temperature.

temperature.

• Use a piece of cloth with water or mild cleansing agent to clean the case and then use a piece

of dry cloth to wipe it dry. Use a piece of dry cloth to wipe the cu when it is dirty.

• Do not use any strong cleansers to clean it.

• When the unit is not to be used for a long time, remove the batteries.

(Batteries may leak or cause harm).

What to do if …..

Problem Reason Solution

Heart Rate

Symbol

Appears in the measurement

condition and ashes when

pulse is detected.

• Measurement in progress, remain quiet.

Low Battery

Indicator

Appears when the battery

voltage is excessively low or

the positions of the batteries

are incorrect.

• Replace all four batteries with new ones.

Insert the batteries in the correct

positions. Be aware of +/- positions.

Measuring

Error

Appears when the accurate

blood pressure and pulse

could not be obtained.

• Press “Start/Stop” button again and

remeasure.

• Check if cu is wrapped

according to instructions.

• Check that there are no kinks in tube.

• Check palm if exerting eort.

• Check if talking or moving

during measurement.

• Check if posture is correct.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun BP5900 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info