Bedienungsanleitung Braun BP6000 series (Seite 5 von 119) (Alle Sprachen)

672105

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite

6. LCD Display will show the results and WHO indicator arrow after measurement.

After taking blood pressure measurement, turn o the device by pressing the start button

(1) or

automatically after 1 minute.

Memory function

Your blood pressure monitor can store the latest 40 readings for both users each for the BP6000, 50

readings for both users each for the BP6100 and 60 readings for both users each for the BP6200.

Storing measurement data

After each blood pressure measurement, the Systolic pressure, diastolic pressure, pulse rate and the

time & date of speci c day will be automatically stored. Memory #01 is always the most recent one.

Once the memory is full, the oldest values will be overwritten.

Press memory button

(2) to review the stored data. The last memory data (sys/dia/pul) with

measurement date/time, IHB (for BP6200 only) and WHO indicator will show on LCD. Press memory

button

(2) again to show the previous data. Be aware that the correct user A or B is chosen.

Average function for BP6000

Press the average button (5) to show last 3 readings average

on LCD. Press average button again to clear LCD for 0.5 seconds,

then results will be shown again.

Average function for BP6100

Press the average button (5) to show the full day average of

past 7 days on LCD. Press average button again to clear LCD for 0.5

seconds, then results will be shown again.

Average function for BP6200

Press the average button (5) to show the full day average of past 7 days on LCD.

Press the average button second to show the morning average of past 7 days on LCD.

If the result is with morning hypertension, the morning hypertension icon will

be shown. Press the average button third time to show the evening average of past

7 days on LCD. Press the average button fourth time to show the full day average of

past 7 days again.

A A

Select mode

How to select user A /user B

• Make sure the Product is in power o mode.

• Slide the user switch to user A or user B, the current user mode will  ash on the LCD display.

The WHO/ESH indicator to evaluate blood pressure data

This device has a blood pressure level indicator established according to WHO

and the European Hypertension Society Guidelines (ESH) in 2007. For every

measurement displayed on the screen, the cursor will indicate the blood pressure

level with the corresponding color code, from green to red. You can use this

classi cation daily to guide you to understand your blood pressure level. If you are

really concerned by the classi cation level, you should consult your doctor.

Setting month, date and time

a. Switch o the device for the date/time setting.

b. User press set button

(4) to start the year setting, then the

“year” will blink display, user can press adjust (3) to adjust

year by increase step “1”.

c. User press set button

(4) to start the month setting, then

the “month” will blink display, user can press adjust (3) to

adjust month by increase step “1”.

d. User press set button

(4) to start the day setting, then the

“day” will blink display, user can press adjust (3) to adjust

day by increase step “1”.

e. User press set button

(4) to start the hour setting, then the

“hour” will blink display, user can press adjust (3) to adjust

hour by increase step “1”.

f. User press set button

(4) to start the minute setting, then

the “minute” will blink display, user can press adjust (3) to

adjust minute by increase step “1”.

g. User press set button

(4) to end all the date/time setting,

all the blink are stopped.

Note: Holding the adjust button will scroll the value.

Taking a measurement

Wrap the cu around the arm (see “applying the arm cu ” section above).

1. Sit upright on the chair to have a correct posture.

2. Press and release start button

(1), date/time and current user will be displayed.

3. Set user A/B switch (6) to A for user A or B for user B, LCD display will show user A or B symbol.

4. Press and release the start button

(1), all icons on display will be shown for 2 seconds. The

device will adjust to zero automatically. The measuring blood pressure symbol will then  ash on

the display and the air pressure will automatically pump up to certain pressure level and start

measurement.

Do not move or talk in the midst of taking blood pressure measurement.

5. After the air pressure has increased, the pulse is detected, the heart rate symbol

will start

 ashing.

RED >

GREEN >

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun BP6000 series Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info