Bedienungsanleitung Braun CT3cc (Seite 12 von 66) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

514825

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

Shaver display

Charge status

During charging the symbol in the on/off switch (5)

blinks green. When fully charged, it will light up for a

few seconds, provided the shaver is connected to an

electrical outlet.

Low charge

The symbol in the on/off switch (5) shines red when

the battery is running low. You should be able to

finish your shave. When switching off the shaver a

beep sound reminds you of the low charge status.

Cleaning Status

(only models CT6cc/CT5cc/

CT4cc/CT3cc/CT2cc)

The cleaning indicator lights up, when the shaver

needs to be cleaned in the Clean&Charge station.

Travel lock

The lock symbol lights up when the shaver has

been locked to avoid unintended starting of the

motor (e.g. for storing it in a suitcase).

Using the shaver (see fig. A)

Press the on/off switch (5) to operate the shaver.

Tips for a perfect dry shave

For best results, Braun recommends you to follow

3 simple steps:

1. Always shave before washing your face.

2. At all times, hold the shaver at right angles

(90°) to your skin.

3. Stretch your skin and shave against the

direction of your beard growth.

Cooling

Note: The cooling sensation experienced may differ

from person to person. It is influenced by personal

and environmental factors (e.g. skin, environmental

temperature).

Activation: To activate the cooling function, press

the cooling switch (3) during shaving. The symbol

in the cooling switch shines blue. For best cooling

performance, we recommend to wait a few seconds

after the cooling function has been activated.

Then continue shaving as usual.

Low battery: The symbol

in the cooling switch (3)

starts blinking when the battery is running low and

there is not enough energy left for the cooling func-

tion. You should be able to finish your shave with

activated cooling function.

You can deactivate the cooling function by pressing

the cooling switch again.

Long hair trimmer

To trim sideburns, moustache or beard, press the

release button (8) and slide the long hair trimmer (6)

upwards.

Travel lock

• Activation: By pressing the on/off switch (5) for

3 seconds the shaver is locked. This is confirmed

by a beep sound and the lock symbol in the

display. Afterwards the display turns off.

• Deactivation: By pressing the on/off switch for

3 seconds the shaver is unlocked again.

Manual cleaning of the shaver

(see fig. C/D)

The shaver is suitable for cleaning under running tap

water. Detach the shaver from the power supply

before cleaning it in water.

• Switch the shaver on and rinse the shaver head

under hot running water. You may use liquid soap

without abrasive substances. Rinse off all foam

and let the shaver run for a few more seconds.

• Next, switch off the shaver, remove the Foil &

Cutter cassette and let it dry.

• If you regularly clean the shaver under water, then

once a week apply a drop of light machine oil on

top of the Foil & Cutter cassette.

Alternatively, you may clean the shaver using a brush:

• Switch off the shaver. Remove the Foil & Cutter

cassette (1) and tap it out on a flat surface. Using

a brush, clean the inner area of the pivoting head.

Do not clean the cassette with the brush as this

may damage it!

Clean&Charge station

(models CT6cc/CT5cc/CT4cc/CT3cc/CT2cc)

The Clean&Charge station has been developed for

cleaning, charging, lubricating, disinfecting and

storing your Braun shaver.

13 Station power socket

14 Lift button for cartridge exchange

15 Station-to-shaver contacts

16a Level indicator

16b Status light

17 Start button

18 Cleaning cartridge

Installing the Clean&Charge station (see fig. E)

• Remove the protection foil from the Clean&Charge

station display.

• Press the lift button (14) at the rear side of the

Clean&Charge station to lift up the housing.

• Hold the cleaning cartridge (18) down on a flat,

stable surface (e.g. table).

96189703_CoolTec_MN_S6-68.indd 1296189703_CoolTec_MN_S6-68.indd 12 11.10.12 10:4211.10.12 10:42

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun CT3cc Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info