Bedienungsanleitung Braun epilat xelle easy 5185 (Seite 11 von 58) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

428420

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

B Before starting off

Preparing your skin

Your skin must be dry and free from

grease or cream.

Optional skin cooling: For the first few

epilations or if you have sensitive skin you

can use the cooling application, recom-

mended by dermatologists to help reduce

possible skin irritation.

• Ensure that the gel pack has been in

the deep freezer (***) for at least 2 hours

(for convenience you can store the gel

pack in the freezer).

• Insert the

gel pack underneath the

glove’s transparent foil. Use only with

glove.

• Put transparent (cool) side of the glove

on your leg.

• Start cooling for approx. 1/2 minute,

longer if needed.

• Epilate the cooled skin area immedi-

ately as described in section «C».

• Repeat cooling and epilating until

completion.

• While epilating, please ensure your skin

is dry.

portant: Apply cooling glove to the

same area for no longer than 2 minutes.

Keep away from sunlight. Do not use

gel pack when damaged. Dispose of in

household waste. Do not use if you are

hypersensitive, allergic to the cold, or

if your skin suffers from sensory disturb-

ances, when suffering from cardiac dis-

eases or arterial circulatory disorders.

Preparing the appliance

• Before starting off, thoroughly clean

the epilation head you want to use

(

B or b).

• To remove the epilation head, press the

release buttons

3 on the left and right

and pull it off.

• Click the desired head into place:

– Choose the starter epilation head

if you are epilating for the first time or

if you have very sensitive skin.

– Once your skin is used to epilation,

you may switch to the standard

epilation head

B which allows a

more efficient and faster epilation

thanks to its greater number of

tweezers.

• Plug the cord connector

6 into the

socket

5 and plug the transformer

plug

7 into an electrical outlet.

C How to epilate

1 Make sure one of the attachments A

a is attached to the epilation head.

To turn on the appliance, slide switch

4 to the «optimal» setting. For reduced

speed, choose the «soft» setting. The

SmartLight illuminates as long as the

appliance is switched on.

2 Rub your skin to lift short hairs.

For optimum performance hold the

appliance at a right angle (90°) against

your skin. Guide it in a slow, continuous

movement without

pressure against

the hair growth, in the direction of the

switch.

As hair can grow in different directions,

it may also be helpful to guide the

appliance in different directions to

achieve optimum results.

The massaging rollers

A should always

be kept in contact with the skin,

allowing the pulsating movements to

stimulate and relax the skin for a gentler

epilation. If you are used to epilation

and look for a faster way to efficiently

remove hair, attach the EfficiencyPro

cap

It allows maximum skin contact and

ensures an optimum usage position.

5395378_SE5185_P6-64 Seite 12 Montag, 11. September 2006 12:01 12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun epilat xelle easy 5185 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info