Bedienungsanleitung Braun FHT 1000 (Seite 5 von 12) (Englisch, Spanisch)

597308

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

English

Temperature taking hints

Patients should stay in steady - state room condition for at least 30 minutes.

Hold the thermometer ﬂush against the forehead and swipe slowly from above

the eyebrow down to the temple, and back again. Swiping too slow or too fast

may impact your reading.

Do not remove the thermometer from the forehead before hearing the ﬁnal beep.

Do not take a measurement while or immediately after nursing a baby.

Do not use the Forehead thermometer in high humidity environments.

Patients should not drink, eat, or be physically active before/while taking the

measurement.

Before placing the thermometer sensor onto the forehead, remove dirt, hair, or

sweat.

Use an alcohol swab to carefully clean the sensor and wait for 5 minutes before

taking a measurement on another patient. Wiping the forehead with a warm

or cool cloth may impact your reading. It is advised to wait 15 minutes before

taking a reading.

Read temperature

At the conﬁrmation beep, remove the

thermometer from the forehead and read the

temperature. The screen will illuminate the

appropriate color for the temperature

reading. Green for normal temperatures,

Yellow for slightly elevated temperatures,

and Red indicates that fever may

be present.

To repeat

Go to step 3.

To turn off

Press the power button. To conserve battery power,

the unit will automatically shut down after 20 seconds

of no use.

Calibration

The thermometer is initially calibrated at the time of manufacture. If this

thermometer is used according to the use instructions, periodic re-adjustment is

not required. If at any time you question the accuracy of temperature

measurements, please contact Consumer Relations.

Manufacturing date is given by the LOT number located inside the battery

compartment. The ﬁrst three (3) digits after LOT represent the Julian date that the

product was manufactured and the next two (2) digits represent the last two

numbers of the calendar year the product was manufactured. The last identiﬁers

are the letters that represent the manufacturer.

An example: LOT 11612, this product has been manufactured on the 116th day of

the year 2012.

Always take the temperature in the same location, since the temperature

readings may vary from different locations on the forehead.

In the following situations it is recommended that three temperatures in the

same location be taken and the highest one taken as the reading:

• Newborn infants in the ﬁrst 100 days.

• Children under three years of age with a compromised immune system and

for whom the presence or absence of fever is critical.

• When the user is learning how to use the thermometer for the ﬁrst time

until he/she has familiarized himself/herself with the instrument and obtains

consistent readings.

Memory mode

The Braun Forehead thermometer includes a memory feature to recall the last

temperature reading. The last temperature taken is stored in its memory and will

be automatically displayed for 2 seconds when it is turned on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun FHT 1000 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info