Bedienungsanleitung Braun KF 178 (Seite 7 von 40) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

454315

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Our products are engineered to meet the highest

Standards of quality, functionality and design. We

hope you thoroughly enjoy the new Braun appliance.

Caution

Read all instructions before using the product.

This appliance must be kept out of the reach of

children! Before plugging into a socket, check

whether your voltage corresponds with the voltage

printed on the bottom of the appliance.

Braun electric appliances meet applicable safety

standards. Repairs or the replacement of the mains

ord must only be done by authorised service

personnel. Faulty, unqualified repair work may cause

considerable hazards to the user.

Important

This appliance was constructed to process normal

household quantities. Always use cold water to

make coffee. Warm water or other liquids could

cause damage to the coffeemaker.

Before using it for the first time, or when the coffee-

maker has not been used for some time, fill the water

container

3 to the maximum level with cold water

(i.e. without coffee and without a filter). Turn on

the coffeemaker and allow the water to flow through.

After a brewing cycle is finished, switch off the

appliance and allow the coffeemaker to cool down

for 5 minutes approximately. Otherwise steam can

develop when pouring cold water into the water

container which might cause scalding.

Maximum cups

8 cups (125 ml each)

12 cups ( 83 ml each)

Description

1 Cord storage

2 Water level indicator

3 Water container

C Maximum filling level of the water container

4 Space compensator

D Water filter cartridge (not with model KF 178)

d Dial for water filter exchange

5 AromaSelect dial

6 Cover for the water container

7 Filter support bracket

8 Filter holder

9 Stand for thermal carafe

0 On/off switch

(with red control lamp)

q Ther

mal carate

w Lid

Ther

mal carafe

The flask of the ther

mal carafe is made of double

walled, vacuum glass material. Streaks in the glass

which sometimes look like faults or cracks do not

have any influence on the use of the flask. However,

this material is ver

y fragile. Always check for damage

if you knock or drop the carafe. lf the flask should be

damaged in any way, please have it repaired at your

Braun Customer Service. Replacement carafes are

available at your dealer or at the Braun Ser

vice

Centre.

It is important to avoid sudden and extreme

differences in temperature. Never fill ice cubes in the

thermal carafe. Never submerge the carafe in water,

or put it in a dishwasher.

Do not place the carafe on a hotplate or other heat

sources as this would damage the plastic base part

of the carafe. Both, the base of the carafe and the

stand to put the carafe on will get warm during

brewing.

Do not use the thermal carafe in the microwave

ven.

In order to make best use of the heat-retention

properties of the thermal carafe it is essential to

prewarm it. This can be done by rinsing the thermal

carafe with hot water.

To open the lid of the thermal carafe turn the grip

clockwise until the arrow on the lid matches the

arrow on the carafe (f) and take it off. In order to

close the lid again, make sure to engage it exactly in

this position (f) and then turn it anti-clockwise until

the arrow matches the point marking (g). During

brewing the coffee runs through a special opening

of the closed lid. lf you want to pour out coffee after

brewing is finished, give the lid a further turn anti-

clockwise until the arrow matches the cup Symbol

(h). After pouring out, always tur

n the lid back to the

point marking in order to close the carafe. Keep

the carafe upright all times.

Filling with water

lmpor

tant: When filling with water and during coffee

preparation either the space compensator

4 or the

water filter cartridge

D must be installed in the water

container

3. Otherwise the water level indicator 2

will not function correctly and the carafe may over-

flow.

To fill in water, lift the cover of the water container

and pour in cold water (max. = arrow marking in the

water container). The amount of water is shown on

the water level indicator 2

Filling with coffee

Swing out the filter holder 8 (a) and insert the filter.

Put coffee (not ground too finely) into the filter and

close the filter holder again (a) until it snaps in place.

Measure coffee according to the strength desired.

Pre-selecting the taste – ArormaSelect dial

By tur

ning the Ar

omaSelect dial

5 befor

e br

ewing,

you can adjust the taste of your coffee to suit your

personal preference – milder with less bitter aftertaste

or stronger, but always with the same full flavour.

lf you pr

efer milder cof

fee, turn the AromaSelect dial

in the direction of the symbol (b). Should you

prefer a stronger taste, turn the AromaSelect dial

towards the symbol. Regardless of the position

you select, the cof

fee will always have the same full

English

3117351_MN 18.03.2005 9:09 Uhr Seite 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun KF 178 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info