Bedienungsanleitung Braun LS 5500 - 5328 Silk and Soft (Seite 10 von 82) (Alle Sprachen)

673338

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

and the optimum usage angle so that

both, the shaver foil and the long hair

trimmer are in contact with the skin.

• Move the appliance slowly against the

direction of hair growth. Adjusting

to the body contours, the long hair

trimmer first raises all long hairs and

cuts them off. Then the shaver foil

follows to smooth away any stubble.

• If you have not shaved for a long period

of time, remove the OptiShave attach-

ment to allow a faster pre-cutting of

longer hairs (B).

• Also, for the more difficult-to-reach

underarm area remove the OptiShave

attachment for perfect reach.

• Always ensure that both, the shaver foil

and the long hair trimmer are in contact

with the skin.

Trimming & Styling

For precise lines and contours like the

bikini line, lock the long hair trimmer by

sliding the TrimLock to the position

«trim» (C1).

To trim hair to a uniform length (about

4 mm), e.g. in the bikini area, lock the long

hair trimmer , place the OptiTrim attach-

ment onto the shaver head (C2).

When you are finished

After shaving, you may want to smooth

on a little body cream or lotion. However,

avoid using irritating substances like deo-

dorants with alcohol right away.

Cleaning

This appliance is suitable for

cleaning under an open water

tap.

Warning: Detach the hand-held

part from the power supply before

cleaning it in water.

Regular cleaning ensures better shaving

performance. After each shave, proceed

as follows (D1):

• Press the release buttons to remove

the shaver head.

• Rinse the shaver head and the cutter

block separately under warm running

water. A natural based soap may

also be used provided it contains no

particles or abrasive substances. Rinse

off all foam.

• Leave the cutter block and shaver head

to dry separately.

Alternatively, you may clean the shaver

using the brush provided (D2):

• Press the release buttons to remove

the shaver head. Tap the bottom of the

shaver head gently on a flat surface (not

on the foil).

• Brush out the cutter block and the

inside of the shaver head. However, do

not clean the shaver foil with the brush

as this may damage the foil.

Your Braun Silk&Soft comes with a prac-

tical charging holder which is also

very useful for leaving the shaving parts

to dry.

When you insert the appliance with the

switch facing the holder and the OptiTrim

attachment placed on the head, it snaps

into the holder for convenient transport.

Keeping your Braun Silk&Soft

in top shape

• The shaving parts need to be lubricated

regularly every 3 months (E). If you

clean the shaver head under running

water, lubricate it after each cleaning.

Apply some light machine oil or vase-

line to the shaver foil and the metal

parts of the long hair trimmer. Then

remove the shaver head and also apply

a tiny amount of vaseline as shown in

picture section (E).

Ladystyle_ LS5500_MN_P6-84 Seite 10 Donnerstag, 13. Oktober 2005 10:41 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun LS 5500 - 5328 Silk and Soft Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info