Bedienungsanleitung Braun LS5560 - 5328 Silk and Soft (Seite 11 von 88) (Alle Sprachen)

673339

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Cleaning

Cleaning the shaver head with the

brush (D1)

Press the release buttons to remove

the shaver head. Tap the bottom of the

shaver head gently on a flat surface

(not on the foil).

Brush out the cutter block and the

inside of the shaver head. However, do

not clean the shaver foil with the brush

as this may damage the foil.

Cleaning the shaver head under

running water (D2)

The shaver head is suitable for

cleaning under running tap water.

Warning: Detach the shaver from

the power supply before cleaning

the shaver head in water.

Press the release buttons to remove

the shaver head.

Rinse the shaver head and the cutter

block separately under warm running

water. A natural based soap may

also be used provided it contains no

particles or abrasive substances.

Rinse off all foam.

Leave the cutter block and the shaver

foil to dry separately.

How to clean and maintain the Skin

Smoothing attachment

To clean the Skin Smoothing attachment

(6), first remove it (E), then thoroughly

brush out the smoothing pad (6a). From

time to time, you may also clean it with

soapy water. Let it dry before using it

again.

A spare smoothing pad (6b) is included

for replacement.

Keeping your Braun Silk&Soft

in top shape

The shaving parts need to be

lubricated regularly every 3 months (F).

•

If you clean the shaver head under

running water, lubricate it after each

cleaning.

Apply some light machine oil or

vaseline to the shaver foil and the

metal parts of the long hair trimmer.

Then remove the shaver head and also

apply a tiny amount of vaseline as

shown in picture section (F).

The shaver foil and the cutter block are

precision parts that wear out with time.

To maintain optimum shaving perform-

ance, replace your foil and cutter block

when you notice a reduced shaving

performance.

Do not shave with a damaged foil or

cord.

How to replace the shaving parts

Shaver foil: Press the release buttons

to remove the shaver head. To remove

the shaver foil, press the blue plastic

frame (G). To mount a new one, insert it

from inside the shaver head.

Cutter block: To remove the cutter

block, press and turn it 90° (H1), then

take it off. To put on a new cutter

block, press it onto the cutter block

holder and turn 90° (H2).

Replacements parts (shaver foil, cutter

block, smoothing pad) can be obtained

from your retailer or Braun Customer

Service Centres.

Charging holder

Your Braun Silk&Soft comes with a

practical charging holder (9) which is also

very useful for leaving the shaving parts

to dry. When you insert the appliance

with the switch facing the holder and the

Bikini zone trim attachment placed on

the head, it snaps into the holder for

convenient transport.

Preserving the rechargeable batteries

In order to maintain the optimum capacity

of the rechargeable batteries, the shaver

•

5328407_LS5560.indd 125328407_LS5560.indd 12 13.09.2006 9:35:17 Uhr13.09.2006 9:35:17 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun LS5560 - 5328 Silk and Soft Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info