Bedienungsanleitung Braun MR 500CA (Seite 5 von 20) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

454431

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

English

Our products are engineered to meet

the highest standards of quality, functionality

and design.

We hope you thoroughly enjoy your new

Braun appliance.

Caution

Please read the use instructions carefully

and completely before using the

appliance.

• The blades are very sharp!

• Alwa

ys unplug the appliance before

assembling, disassembling and cleaning.

• The appliance must be kept out of reach

of children.

• Do not hold the motor part (A) nor the upper

part of the «ca» chopper (I) under running

water, nor immerse them in water.

• Braun electric appliances meet

applicable safety standards. Repairs or

the replacement of the mains cord must

only be done by authorised service

personnel. Faulty, unqualified repair

work may cause considerable hazards

to the user.

• Before plugging into a socket, check

whether your voltage corresponds

with the voltage printed on the bottom

of the appliance.

• The appliance is constructed to process

normal household quantities.

• The beaker (E) is not microwave-proof.

Description

Motor part

On/off switch

Buttons for releasing the working parts

Shaft with blade

Mixing beaker

Measuring beaker with air-tight lid

Wall mount

«hc» chopper

«ca» chopper

How to operate your handblender

The handblender is perfectly suited for

preparing dips, sauces, soups, mayonnaise

and baby food as well as for mixing drinks

and milkshakes.

1. Insert the shaft with blade (D) into the

motor part (A) until it locks.

2. To avoid splashing, insert the hand-

blender into the vessel first, only then

press switch (B).

3. To release, press buttons (C) and pull the

shaft with blade off.

You can operate the handblender in the

mixing/measuring beaker (E/F), and just

as well in any other vessel. When blending

directly in the saucepan while cooking, take

the pan from the stove first to protect your

handblender from overheating.

How to use your chopper

attachment

The chopper is perfectly suited for chopping

meat, cheese, onions, herbs, garlic, carrots,

walnuts, hazelnuts, almonds, prunes etc.

Pre-cut meat, cheese, onions, garlic, carrots,

chilis (see table page 3). Remove stalks and

un-shell nuts.

N.B.:

Beef: before chopping, all bones, tendons

and gristle should be removed.

Chilis (with water): only use «hc» chopper.

Do not chop ice cubes or extremely hard

food, such as nutmeg, coffee beans,

chocolate and grains.

1. Carefully remove the plastic cover from

the blade (b).

2. Caution: the blade (b) is very sharp!

Always hold it by the upper plastic part.

Place the blade on the centre pin of

the chopper bowl (c), press it down and

turn 90° until it locks. Always place the

chopper bowl (c) on the anti-slip base (d).

3. Place the food in the chopper bowl.

4. Put the upper part (a) on the chopper

bowl.

5. Insert the motor part (A) in the upper part

(a) of the chopper until it locks.

6. Press switch (B) to operate the chopper.

During processing, hold the motor part

with one hand and the chopper with the

other.

7. First remove the motor part (A).

8. Then remove the upper part (a).

9. Carefully take out the blade (b).

(You may have to turn the blade slightly.)

10.

Then remove the processed food from the

chopper bowl. The anti-slip base also

serves as an air-tight lid for the chopper

bowl.

Cleaning

After use, remove the shaft with blade or

the chopper. Clean the motor part (A) and

the upper part of the «ca» chopper (a) with

a damp cloth only. All other parts can be

cleaned in the dishwasher. However, after

processing very salty food, you should rinse

the blades of the shaft and the chopper right

away. Also, be careful not to use in your

dishwasher an overdose of cleaner and

decalcifier.

When processing foods with colour

(e.g. carrots), the plastic parts of the

appliance may become discoloured.

Wipe these parts with vegetable oil

before cleaning.

Subject to change without notice.

This product conforms to the

EMC-Requirements as laid down

by the Council Directive 89/336/EEC

and to the Low Voltage Regulation

(73/23 EEC).

a Upper part

b Blade

c Chopper bowl

d Anti-slip base

4187463_MR_500 Seite 5 Montag, 26. Januar 2004 10:28 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun MR 500CA Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info