Bedienungsanleitung Braun MR 6550 M FPHC (Seite 8 von 31) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

69338

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

English

Our products are engineered to meet the highest

standards of quality, functionality and design.

We hope you thoroughly enjoy your new Braun

appliance.

Caution

Please read the use instructions carefully and

completely before using the appliance.

• The blades are very sharp!

• Alwa

ys unplug the appliance when it is left unat-

tended and before assembling, disassembling,

cleaning and storing.

• This appliance is not intended for use by children

or persons with reduced physical or mental

capabilities, unless they are given supervision by a

person responsible for their safety. In general, we

recommend that you keep the appliance out of

reach of children.

• Do not hold the motor part nor the whisk gear

box under running water, nor immerse them in

water.

• Braun electric appliances meet applicable safety

standards. Repairs or the replacement of the

mains cord must only be done by authorised

service personnel. Faulty, unqualified repair work

may cause considerable hazards to the user.

• Before plugging into a socket, check whether your

voltage corresponds to the voltage printed on the

bottom of the appliance.

• The appliance is constructed to process normal

household quantities.

• Neither the beaker , nor the chopper bowl/jug (c)

is microwave-proof.

Description

Motor part

On/off switch for variable speed

Turbo switch

Buttons for releasing the working parts

Variable speed regulator

Blender shaft

Measuring beaker with air-tight lid

Whisk gear box

Whisk

«HC» chopper

«BC» chopper

Ice crusher insert for «BC» chopper

Setting the speed

When activating switch , the processing speed

corresponds to the setting of variable speed regulator

. The higher the setting, the faster the chopping

results.

However, maximum processing speed can only be

achieved by pressing the turbo switch . You may

also use the turbo switch for instant powerful pulses

without having to manipulate the speed regulator.

Depending on the application, we recommend the

following speed settings:

Handblender 1...turbo

Chopper 1...turbo

Whisk 1...15

How to operate your handblender

The handblender is perfectly suited for preparing

dips, sauces, soups, mayonnaise and baby food as

well as for mixing drinks and milkshakes.

1. Insert the motor part into the blender shaft

until it locks.

2. Introduce the handblender in the vessel, then

press the on/off switch or the on/off turbo

switch .

3. To release the blender shaft after use, press

buttons and pull it off.

You can operate the handblender in the measuring

beaker , and just as well in any other vessel. When

blending directly in the saucepan while cooking, take

the pan from the stove first to protect your hand-

blender from overheating.

How to operate your whisk

Use the whisk only for whipping cream, beating egg

whites and mixing sponges and ready-mix desserts.

1. Insert the whisk into the whisk gear box , then

insert the motor part into the gear box until it

locks.

2. Place the whisk in a vessel and only then, press

switch to operate it.

3. To release, press buttons and pull off the gear

box. Then pull the whisk out of the gear box.

For best results:

• Use a wide bowl instead of the beaker .

• Move the whisk clockwise, holding it slightly

inclined.

Whipped cream

Only whip up to 400 ml chilled cream (min. 30

% fat

content, 4 – 8 °C).

Start with a low speed setting (1) and while whipping,

increase the speed to setting 15.

Egg snow

Only whip up to 4 egg whites.

Start with a medium speed setting (7) and while

beating, increase the speed to setting 15.

How to operate your chopper

attachment(s)

«HC» chopper «BC» chopper

(a) Chopper gear box (a) Chopper gear box

(b) Blade (b) Blade

(d) Anti-slip base/lid (d) Anti-slip base/lid

(e) Ice blade

(f) Ice crusher insert

Both the «HC» and the «BC» choppers are perfectly

suited for chopping meat, cheese, onions, herbs,

garlic, carrots, walnuts, almonds, prunes etc.

When chopping hard goods (e.g. hard cheese) use

the turbo switch .

N.B.:

Do not chop extremely hard food, such as nutmeg,

coffee beans and grains.

Use the «HC» chopper for smaller quantities.

It is specially suited for chopping herbs and chilis

(with water).

Use the «BC» chopper for larger quantities and for

hard foods like parmesan cheese or chocolate.

Furthermore, the «BC» chopper is suitable for a

variety of other applications like shakes, drinks,

purées, light doughs and ice crushing.

Before chopping ...

• pre-cut meat, cheese, onions, garlic, carrots, chilis

(see processing guide on page 5)

• remove stalks from herbs, un-shell nuts

• remove bones, tendons and gristle from meet.

For best results, please refer to the speed settings

recommended in the processing guide.

Chopping

(see picture section

on page 4)

1. Carefully remove the plastic cover from the blade

(b). Caution: the blade is very sharp! Always hold

it by the upper plastic part.

2. Press the blade onto the centre pin of the chopper

bowl (c) until it locks. «HC» chopper: press down

the blade and turn 90° to lock it. Always place the

chopper bowl on the anti-slip base (d).

A F

I H

98575356_MR6000_P6-36 Seite 8 Freitag, 29. Februar 2008 8:26 08

Braun MR 6550 M FPHC Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Braun MR 6550 M FPHC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info