Bedienungsanleitung Braun si 6265 (Seite 9 von 73) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

322011

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

•

Keep the iron in the upright position and

connect it to the mains. Select the tem-

perature according to the ironing guide on

the heel rest of the iron or on the label in

your garments.

•

The temperature pilot light (7) goes off,

when the desired temperature is reached

(after approx. 1 minute).

C Ironing

1 Steam on/off

For steam ironing, the temperature selector

(6) must be set within the red range.

Press the steam button (3) to start the

steam mode.

steam on steam off

With the steam button in its upper position

(steam on), turn the steam regulator (3a) to

adjust the steam quantity.

We recommend a medium steam setting

for all normal ironing. Only when ironing

linen, thick cotton or similar fabrics we

recommend the maximum steam setting.

Preconditioning

(not with model SI 6120)

Steam develops also horizontally at the

front area of the sole plate. This precondi-

tions the textiles by «pre-steaming», thus

making ironing easier.

Be careful – steam comes out laterally.

2 Power shot

Prior to use, press the power shot button

(5) 3 to 4 times to activate it. Press the

power shot button in intervals of at least

5 seconds.

Power shot can be activated when dry

ironing. However, the temperature selector

has to be set in the range between «•••»

and «max». The power shot function can

also be used in the vertical position for

steaming hanging clothes (not with model

SI 6120).

3 Spray function

Press the spray button (4).

4 Dry ironing

Turn the steam mode off by pressing the

steam button (3) so that it catches in the

lower position.

D Automatic shut-off

(model 6595/6265 only)

The auto-off mechanism causes a slight

rattling noise during ironing. This is normal

and in no case indicates a fault of the iron.

The «auto-off» pilot light will flash when the

automatic shut-off is activated.

This happens when the iron has rested …

– horizontally

on its sole plate for about

30 seconds or

– vertically

on its heel rest for about

8/15 minutes.

To turn on the iron again, just move it.

When the «auto-off» pilot light stops

flashing, the electrical power is on again.

The automatic shut-off will be activated

approximately 2 minutes after the iron is

plugged into a socket.

E Textile Protector

(models 6590/6595 only)

Before attaching the Textile Protector (9) for

the first time, iron approximately 2 minutes

without the Textile Protector.

The Braun Textile Protector protects

delicate fabrics from heat damage and

makes it possible to iron most dark fabrics

without an intermediate cloth. To check the

reaction of your fabrics before you start

ironing, we recommend that you iron a

small section of material on the reverse

side. With the Protector, you are able to iron

delicate fabrics with the temperature setting

•••

» or «

max

», so that you can use all

steam functions your iron offers.

After having attached the Textile Protector,

wait about 1

minutes before you start

ironing. Always store your iron with the

Textile Protector detached.

F After ironing

•

Unplug the iron and press the steam on/off

button (3) so that it catches in its lower

position (steam off).

•

To prolong the life of the iron, empty the

water tank.

•

Store the cool iron in a dry place always

standing on its heel rest.

G Maintenance and cleaning

To clean the sole plate, use steel wool.

Then wipe the sole plate clean with a cloth.

Never use a scouring pad, vinegar nor

other chemicals. To clean the soft material

of handle and power shot and spray

buttons, use soapy water.

H Cleaning the anticalc valve

The iron’s anticalc valve is located at the

lower end of the steam button (3). It has

to be decalcified regularly (e.g. when the

steam development is insufficient).

Proceed as follows:

4674361_SI6000_S6-76 Seite 9 Donnerstag, 8. September 2005 10:23 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun si 6265 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info