Bedienungsanleitung Braun si 6295 freestyle (Seite 10 von 19) (Deutsch, Englisch)

323915

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

4 Dry ironing

Turn the steam mode off by pressing the

steam button (3) so that it catches in the

lower position.

Automatic shut-off

(model 6295 only)

The auto-off mechanism causes a slight

rattling noise during ironing. This is normal

and in no case indicates a fault of the iron.

The temperature pilot light (7) will flash

when the automatic shut-off is activated.

This happens when the iron has rested …

– horizontally

on its sole plate for about

30 seconds or

– vertically on its heel rest for about

8 minutes.

To turn on the iron again, just move it.

When the temperature pilot light stops

flashing, the electrical power is on again.

The automatic shut-off will be activated

approximately 2 minutes after the iron is

plugged into a socket.

D Textile Protector Plus

Before attaching the Textile Protector (8) for

the first time, iron approximately 2 minutes

without the Textile Protector.

The Braun Textile Protector protects

delicate fabrics from heat damage and

makes it possible to iron most dark fabrics

without an intermediate cloth. To check the

reaction of your fabrics before you start

ironing, we recommend that you iron a

small section of material on the reverse

side. With the Protector, you are able to iron

delicate fabrics with the temperature setting

•••

» or «

max

», so that you can use all

steam functions your iron offers.

After having attached the Textile Protector,

wait about 1

minutes before you start

ironing.

E After ironing

•

Unplug the iron and press the steam on/off

button (3) so that it catches in its lower

position (steam off).

•

To prolong the life of the iron, empty the

water tank.

•

Store the cool iron in a dry place always

standing on its heel rest.

F Maintenance and cleaning

To clean the sole plate, use steel wool.

Then wipe the sole plate clean with a cloth.

Never use a scouring pad, vinegar nor

other chemicals. To clean the soft material

of handle and power shot and spray

buttons, use soapy water.

G Cleaning the anticalc valve

The iron’s anticalc valve is located at the

lower end of the steam button (3). It has

to be decalcified regularly (e.g. when the

steam development is insufficient).

Proceed as follows:

1) Unplug the iron and empty the water tank.

2) Press the steam button so it is lifted.

3) Remove carefully (some water may now

leak from the sole plate).

4) Do not touch the anticalc valve.

5) Immerse in vinegar (not vinegar essence)

or lemon juice until the lime becomes soft.

6) Use a non-metallic brush until all openings

are clean.

7) Rinse under running water.

8) Re-insert the steam button.

9) Press to check the steam on/off function.

Note:

the iron must never be used without

the steam button.

H Decalcifying / anticalc system

When scale particles come out of the steam

vents or when the steam development is

insufficient even after cleaning the anticalc

valve, you should clean the steam chamber

as follows:

1) Make sure the steam button is in its lower

position.

2) – 3) Fill water into the tank, connect to the

mains and select the «•••» temperature

setting.

4) – 5) Wait until the pilot light turns off.

Unplug the iron.

6) – 7) Hold the iron over a sink, then press the

steam button so it is lifted, carefully pull it

up, turn it and rest it in this position.

Caution:

When the steam button is pulled

up, hot water and steam will come out from

the sole plate.

8) Push back the steam button until it catches

in the lower position.

9) – 10) Fill water into the tank, connect to the

mains and select the «•••» temperature

setting.

11) – 13) When the pilot light goes off, press

the power shot button 4 times to rinse the

iron. Disconnect the iron and wait for the

sole plate to cool off, then clean it as

described above in section «G».

98762044_SI6000_S6-20 Seite 10 Montag, 7. Juli 2008 9:43 09

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun si 6295 freestyle Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info