Bedienungsanleitung Braun si 8570 (Seite 6 von 20) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

321635

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Our products are engineered to meet the

highest standards of quality, funtionality and

design. We hope you enjoy your new Braun

steam iron.

Notice:

Remove the label, if any, from the sole

plate before first use.

Important Safeguards

• Before using the iron, read the use

instructions completely. Keep the use

instructions during the entire life of the iron.

• Make sure your voltage corresponds to the

voltage printed on the iron. Connect the iron

to alternating current only.

• Always unplug the iron before filling with

water. Always pull the plug, not the cord.

The cord should never come in contact with

the hot objects or the sole plate.

• Never immerse the iron in water or other

liquids.

• During ironing pauses, always place the

iron upright on its heel rest. Unplug it when

leaving the room, even if only for a short

time.

• Keep the iron away from children,

especially when using the «jet» function.

Electric irons combine high temperatures

and hot steam that could lead to burns.

• Never iron or dampen clothes while wearing

them.

• Check the cord regularly for possible

damage.

• If the appliance (including cord) shows any

defect, stop using it and take it to a Braun

Service Centre for repair.

• Faulty or unqualified repair work many

cause accidents or injury to the user.

• Braun electric appliances meet applicable

safety standards.

A Description

1 «jet» of steam openings

2 Water tank opening

3 Spray nozzle

4 Power shot button

5 2-function button: spray/«jet» of steam

6 Steam regulator

7 Extra steam button

8 Pilot light

9 Temperature selector

B Before starting off

• This iron is designed for tap water. If you

have extremely hard water, we recommend

to use a mixtur of 50 % tap water and 50 %

distilled water. Fill the water tank to «max»

marking. Never use distilled water

exclusively. Do not add any additives (e.g.

starch).

• Keep the iron in the upright position and

connect it to the mains. Select the

temperature according to the ironing guide

on the heel rest of the iron or on the label in

your garments.

• The pilot light goes off when the desired

temperature is reached (after approx.

1 ó min.).

C Ironing

Vario steam

You can increase and reduce the quantity of

steam by turning the steam regulator. The

steam regulator and

the temperature

selector have to be set within the red range

Notice:

While ironing, do not turn the steam

regulator beyond the red range. For extra

steam, power shot and «jet» of steam, the

temperature selector must be set within the

continuous red range. These functions can

even be activated when dry ironing.

Extra steam

Press the extra steam button (7) for max.

3 seconds, but not more often than 4 times

per minute.

Power shot

Press the power shot button (4) in intervals

of at least 5 seconds.

Frontal «jet» of steam

Turn the 2-function button (5) to «jet» as far

as it will go, then press it in intervals of min.

5 seconds.

Spray function

Turn the 2-function button (5) to the

symbol and press.

Dry ironing

Set the steam regulator on position «0»

(= steam off).

Notice:

Prior to ironing, press the power

shot and «jet» buttons 3 to 4 times to

activate them. These functions can be used

for steaming hanging clothes.

D After ironing

Unplug the iron. To prolong the life of the iron,

empty the water tank. Store the cool iron in a

dry place always standing on its heel rest.

E Maintenance and cleaning

To clean the sole plate, use steel wool. Never

use a scouring pad, vinegar or other chemicals.

F Cleaning the anticalc valve

The anticalc valve on the steam regulator

has to be decalcified regularly (e.g. when-

ever steam development is insufficient).

For this, the water tank has to be empty

Removing the steam regulator with the

anticalc valve

Turn the steam regulator clockwise to the

double arrow at the end of the anticalc

section and it will lift. Pull it out vertically.

Do not touch the anticalc valve at its lower

end. Immerse the anticalc valve in vinegar

(not vinegar essence) or lemon juice for

minimum 30 minutes. Brush off remaining

residues and rinse under running water

(fig. F 1-5).

Re-inserting the steam regulator

To re-insert the steam regulator follow fig.

6 and 7.

Notice:

The iron must not be used without

the steam regulator.

G Decalcifying/anticalc system

In order to clean the steam chamber from

residues, decalcify it as shown in fig.

G 1-11.

Caution:

Hot water and steam will come

out from the sole plate when the steam

regulator is turned clockwise into the

anticalc area.

Wait for the sole plate to cool down, then

clean it as described above.

Then refill the tank with water, heat up the

iron and press the power shot button 4

times to rinse the iron before ironing

(G 12-13).

Do not use commercial decalcifiers, they

may damage the iron.

H Trouble-shooting guide

Subject to change without notice.

This product conforms to the EMC-

Requirements as laid down by the

Council Directive 89/336/EEC and to

the Low Voltage Regulation (73/23

EEC).

Problem Remedy

Drops coming

out of the steam

vents

Turn the steam

regulator anti-clock-

wise to reduce the

steam or turn it off.

Take longer intervals

when pressing the

«jet», power shot or

extra steam button.

«jet» of steam does

not function

Press the «jet» button

several times.

Less steam

develops or no

steam at all

Check water level.

Clean the anticalc

valve.

Calcium particles

coming through the

steam vents

Decalcify the steam

chamber.

English

SI8570_MN Seite 4 Montag, 10. Juni 2002 1:11 13

Braun si 8570 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info