Bedienungsanleitung Braun si 9720 (Seite 9 von 73) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

321675

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

Dry ironing

If you want to iron without steam, do not press the

steam button (6).

Vertical steam

Hanging curtains and clothes (jackets, suits, coats)

can be steam-ironed to remove wrinkles. Set the

temperature selector within the red section.

Hold the iron vertically, press the steam button

while passing over the material in up and down

movements.

Caution: The steam is very hot. Never direct steam

towards persons.

Textile Protector (SI 9720 model only)

The Textile Protector (18) protects delicate fabrics

from heat damage and makes it possible to iron

most dark fabrics without an intermediate cloth. To

check the reaction of your fabrics before you start

ironing, we recommend that you iron a small section

of material on the reverse side.

With the Textile protector, you are able to iron most

delicate fabrics with the temperature setting «•••»

or «max». We recommend a medium steam setting.

After having attached the Textile Protector, wait

about 1 1/2 minutes before you start ironing. Always

store your iron with the Textile Protector detached.

Refilling the water tank

When pushing the steam button with a low water

level in the tank, the water low indicator (3) will light

up. Then the steam function is blocked until the

water tank is refilled.

• Press the on/off switch (1) to turn off the

appliance before refilling (e).

• Refill the water tank to the «max» marking as

described above, then switch on the appliance

again.

After ironing

• Press the on/off switch to turn off the appliance (f).

• Unplug and let cool down before storing.

• Empty the water tank.

Cleaning and maintenance

Before cleaning, always make sure that the

appliance is unplugged and has cooled down.

Cleaning the iron

To clean the sole plate, use steel wool. Then wipe

the sole plate clean with a cloth. Never use scouring

pads, vinegar or other chemicals. To clean the

handle, use a damp cloth.

Cleaning the boiler

To maintain optimum performance, clean the boiler

after every 10 to 20 times of usage depending on

the amount of calcium in your water. Proceed as

follows (g):

Detach the water tank. Make sure the appliance has

cooled down.

Pull off the silicone cap (15). Use a coin to unscrew

the metal cap (14) (counterclockwise).

Insert the funnel (17) into the boiler opening. Fill in

0.5 l tap water, shake the boiler to rinse well, then

empty it.

Repeat the process until no more calcium particles

come out from the boiler.

After cleaning the boiler, remove the funnel, screw

the steel cap back into the boiler opening (clock-

wise) and put on the silicone cap again.

Trouble-shooting guide

Problem

Drops coming out

of the steam vents

No steam at all

Low steam quantity

Calcium particles

coming out of the

steam vents

Water drops

coming out of the

boiler when the

water tank has

been removed

Help

When you start ironing or

after ironing breaks, this is

normal (hose is cold – steam

condenses). Hold the iron

over a cloth and press the

steam button until the steam

production has normalised.

Select a higher temperature

(red section of temperature

selector).

Set the steam regulator to a

lower setting.

Press the steam button.

Make sure that water tank is

correctly inserted and filled

with water.

The water low indicator (3)

lights up when you need to

refill the water tank.

Choose a higher setting on the

steam regulator.

Wait for the steam pilot light

(4) to go off.

Remark: Sometimes hot steam

is hardly visible, especially

when the room temperature is

high or the iron temperature is

near to max.

Flush the boiler with tap water

(see «Cleaning the boiler»).

When filling the water tank,

add distilled water to the tap

water.

Under certain conditions the

pump might start running

when the water tank is

removed.

Turn off the appliance before

refilling to avoid this effect.

4669351_SI9720/9710_06-76 30.10.2007 15:07 Uhr Seite 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun si 9720 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info