Bedienungsanleitung Braun silk-epil xelle 5270 (Seite 12 von 95) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

428399

Zoom out

Zoom in

Vorherige Seite

1/95

Nächste Seite

As hair can grow in different directions,

it may also be helpful to guide the

appliance in different directions to

achieve optimum results.

Both rollers of the massaging rollers

clip should always be kept in contact

with the skin, allowing the pulsating

movements to stimulate and relax the

skin for a gentler epilation. If you are

used to epilation and look for a faster

way to efficiently remove hair, attach

the EfficiencyPro clip . It allows

maximum skin contact and ensures an

optimum usage position.

3 Leg epilation

Epilate your legs from the lower leg in

an upward direction. When epilating

behind the knee, keep the leg stretched

out straight.

4 Underarm and bikini line epilation

Please be aware that especially at the

beginning these areas are particularly

sensitive to pain. With repeated usage

the pain sensation will diminish.

For more comfort, ensure that the hair

is at the optimum length of 2–5mm.

Before epilating, thoroughly clean the

respective area to remove residue (like

deodorant). Then carefully dab dry with

a towel. When epilating the underarm,

keep your arm raised up so that the skin

is stretched and guide the appliance in

different directions.

As skin may be more sensitive directly

after epilation, avoid using irritating

substances such as deodorants with

alcohol.

Cleaning the epilation head

5 After epilating, unplug the appliance

and clean the epilation head. First

remove the clip used ( or ) and

clean it with the brush.

6 To clean the tweezer element, use the

cleaning brush dipped into alcohol.

Clean the tweezers with the brush from

the rear side of the epilator head while

turning the barrel manually.

7 Remove the epilation head by pressing

the release buttons on the left and

right and pull it off. Give the top of the

housing a quick clean with the brush.

Place the epilation head and your

preferred clip ( or ) back on the

housing

B Shaving

1. Remove the OptiTrim attachment.

Put on the shaver head by clicking

it in (the long hair trimmer should be in

front).

2. When using the shaver head, always

slide the switch to the «optimal»

setting.

3. For best results, guide the shaving

system in a way that about half of the

shaving foil and the long hair trimmer

are in contact with your skin. Always

guide the appliance in the direction of

the trimmer. The trimmer first raises all

long hairs and cuts them off. Then the

flexible foil follows to smooth away

any stubble.

Pre-cuttin

g hair for epilation

4. If you choose to pre-cut your hair to

the ideal length for epilation, place the

OptiTrim attachment onto the shaver

head.

5. Hold the appliance with the OptiTrim

attachment ensuring that the surface

of the comb is lying flat on the skin.

Guide the appliance with the comb

tips against the hair growth as shown

in illustration B 5.

N.B. As hair does not always grow in

the same direction it may be difficult to

cut. In which case, guide the appliance

slightly diagonally or in different

directions.

1a 1b

5396397_SE_5270_S6-100 Seite 12 Montag, 3. April 2006 10:49 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun silk-epil xelle 5270 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info