Bedienungsanleitung Braun silk soft bodyshave 5300 (Seite 9 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

370024

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

When you are finished

After shaving, you may want to smooth

on a little body cream or lotion. However,

avoid using irritating substances like deo-

dorants with alcohol right away.

Cleaning

This appliance is suitable for

cleaning under an open water

tap.

Warning: Detach the hand-held

part from the power supply before

cleaning it in water.

Regular cleaning ensures better shaving

performance. After each shave, proceed

as follows (D1):

• Press the release buttons to remove

the shaver head.

• Rinse the shaver head and the cutter

block separately under warm running

water. A natural based soap may

also be used provided it contains no

particles or abrasive substances. Rinse

off all foam.

• Leave the cutter block and shaver head

to dry separately.

Alternatively, you may clean the shaver

using the brush provided (D2):

• Press the release buttons to remove

the shaver head. Tap the bottom of the

shaver head gently on a flat surface (not

on the foil).

• Brush out the cutter block and the

inside of the shaver head. However, do

not clean the shaver foil with the brush

as this may damage the foil.

Keeping your Braun Silk&Soft

in top shape

• The shaving parts need to be lubricated

regularly every 3 months (E). If you

clean the shaver head under running

water, lubricate it after each cleaning.

Apply some light machine oil or vase-

line to the shaver foil and the metal

parts of the long hair trimmer. Then

remove the shaver head and also apply

a tiny amount of vaseline as shown in

picture section (E).

• The shaver foil and the cutter block

are precision parts that wear out with

time. To maintain optimum shaving

performance, replace your foil and

cutter block when you notice a reduced

shaving performance.

• Do not shave with a damaged foil or

cord.

• How to re

place the shaving parts

Shaver foil: Press the release buttons

to remove the shaver head. To

remove the shaver foil, press the blue

plastic frame (F). To mount a new one,

insert it from inside the shaver head.

Cutter block:

To remove the cutter

block, press and turn it 90° (G1), then

take it off. To put on a new cutter block,

press it onto the cutter block holder

and turn 90° (G2).

Subject to change without notice.

This product conforms to the

European Directives EMC

89/336/EEC and Low Voltage

73/23/EEC.

Please do not dispose of the

product in the household waste at

the end of its useful life. Disposal

can take place at a Braun Service

Centre or at appropriate collection points

provided in your country.

Foe electric specifications, see printing on

the special cord set.

Ladystyle_LS5300_MN_P6-72 Seite 9 Donnerstag, 13. Oktober 2005 10:08 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun silk soft bodyshave 5300 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info