527140
11
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
11
6) Use a non-metallic brush until all openings
are clean.
7) Rinse under running water.
8) Re-insert the steam button.
9) Press to check the steam on/off function.
Note: the iron must never be used without
the steam button.
H Decalcifying / anticalc system
When scale particles come out of the steam
vents or when the steam development is
insuffi cient even after cleaning the
anticalc valve, you should clean the steam
chamber as follows:
1) Make sure the steam button is in its lower
position.
2) 3) Fill water into the tank, connect to the
mains and select the «•••» temperature
setting.
4) 5) Wait until the pilot light turns off.
Unplug the iron.
6) 7) Hold the iron over a sink, then press the
steam button so it is lifted, carefully pull it
up, turn it and rest it in this position.
Caution: When the steam button is pulled
up, hot water and steam will come out
from the sole plate.
8) Push back the steam button until it catches
in the lower position.
9) 10) Fill water into the tank, connect to the
mains and select the «•••» temperature
setting.
11) –13) When the pilot light goes off, press
the power shot button 4 times to rinse the
iron. Disconnect the iron and wait for the
sole plate to cool off, then clean it as
described above in section «G».
Note: the iron must never be used without
the steam button.
Trouble-shooting guide
Problem Remedy
Drops coming
out of the steam
vents
Turn the steam
regulator counter-
clockwise to reduce
the steam or press the
steam button to turn
the steam off.
Take longer intervals
when pressing the
power shot button.
Select a higher
tempera ture setting.
No steam
at all
Press the steam button
so that it is lifted.
Less steam
develops or
no steam at all
Clean the anticalc
valve (see «G»).
Calcium par-
ticles coming
through the steam
vents
Decalcify the steam
chamber (see «H»).
Subject to change without notice.
Please do not dispose of the
product in the household waste at the
end of its useful life. Disposal can take
place at a Braun Service
Centre or at appropriate collection
points provided in your country.
5712710034_TS_545-505_S06-80.indd 115712710034_TS_545-505_S06-80.indd 11 03.06.13 10:4203.06.13 10:42
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Braun TS545 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info