Bedienungsanleitung Bravilor Bonamat B40 (Seite 21 von 51) (Englisch)

545947

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

version 1.0ECopyright Bravilor Bonamat B.V.

3.2 Installation

CAUTION!

− Do not overlook the risk of freezing. Never

place the machine in rooms in which the

temperature can drop below 0°C.

− Never install the machine in front of entrances,

exits or passageways intended for emergency

services.

D Place the machine on a flat, sufficiently solid

surface close to a water connection and an

earthed electrical power outlet. Leave sufficient

space at the back and front of the machine for

maintenance and repair purposes.

3.2.1 Connection to the water

and electrical system

D Connect the machine to a readily accessible

manually operated tap, so that the water

supply can easily be turned off.

WARNING

n Power supply voltages vary from one country

to another. Ensure that the machine is suitable

for connecting to the local power supply.

Details on the required supply voltage and

frequency can be found on the identification

plate.

D Connect the machine to the electrical supply in

such a way that the power can easily be

disconnected.

D Ensure that the machine is correctly earthed.

D Never connect the machine to a power supply

where heavy loads resulting from switching on

other machines may cause variations in voltage.

3.2.2 Initial use

TIP

− With initial use the machine makes use of the

default factory settings. These settings can, if

desired, later be changed by properly

trained authorised users (§ 7.3).

− With initial use the coffee−making system is

exclusively flushed with water; no coffee is

made.

3.2.2.1 Flushing the coffee−making

system

D Place the filter unit (P.) on the coffee container

(U.).

D Turn the spray head (C.) above the hole in the

cover (Q.) of the filter unit (P.).

D Switch the ON/OFF switch (E.) on.

− The indicator lamp in the switch lights up.

The default options appear in the display

(fig. 5 ).

D Push the selection key for amount 2 (H.).

− A signal sounds. The coffee−making

process is started. The selected amount

flashes in the display.

As soon as the hot water supply through the

spray head has stopped, the filter pan in the

display starts flashing. This means that the

dripping−on time has started. (Only when the

dripping−on time is set). The dripping−on time is

standard set to 2 minutes. After the dripping−on

time has terminated, a signal sounds (3 short

beeps) indicating that the coffee−making process

has finished.

D Tap the water through the coffee tap (X.).

D Turn the spray head above the filter unit of the

other container.

D Repeat the above steps for the other coffee

container.

After that the coffee−making system is ready for

use (chapter 4.)

Fig. 5 Display with the default options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bravilor Bonamat B40 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bravilor Bonamat B40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info