Bedienungsanleitung Bravilor Bonamat B40 (Seite 35 von 51) (Englisch)

545947

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

version 1.0ECopyright Bravilor Bonamat B.V.

7.3 The extended programming menu

Below a description is given of how users with

extended authority (principal), after having

entered the PIN code, can view and adjust all

settings. First read this section to see which

settings can be made.

TIP

− The extended programming menu needs a

principal user PIN code.

− Enter the principal user PIN code to access

the programming menu. The programme

starts in the carousel (fig.10 ) of the extended

users’ menu with § 7.3.1, ”Setting total

amount of water”.

− When a wrong PIN code has been entered,

one should wait a while until the initial screen

re−appears on the display. Enter the PIN

code again.

− Press selection key (N.)⇑ to go clockwise to

the next setting (§ 7.3.2), also see fig.10 .

− Press selection key (M.) ⇓ to go counter−

clockwise to the next setting (§ 7.3.14). By

pressing a selection key several times the

entire carousel can be browsed through

(fig.10 ).

− The settings are described in the order of the

carousel, clockwise (fig.10 ).

− On the display the value to be adjusted is

each time indicated by flashing.

− When an enter symbol ↵ appears on the

display, the setting can be confirmed by

pressing the confirmation key (L.).

− With the red stop key (K.) the changing of the

setting can be interrupted and cancelled. By

pressing again the red stop key (K.) the

programming is left and the programme returns

to the users’ menu (§ 7.1). The change is not

saved.

− When after confirming a changed setting no

further changes are to be made, the

programming menu can be left by pressing the

stop key (K.). The changes are saved and the

programme returns to the users’ menu (§ 7.1).

− When for 20 seconds no activities have taken

place in the programming menu, the

programme returns to the users’ menu

(§ 7.1). Non−confirmed settings are not

saved.

− When the symbol appears in the

menu, the setting can be set to zero by

pressing simultaneously both selection keys

(M.)⇓ and (N.)⇑.

7.3.1 Setting total amount of

water

The total amount of water to be delivered can be

adjusted, as always a certain amount of water

remains behind in the coffee filter. This amount

can differ by the use of different kinds of coffee

and grinds. The default setting is 6% extra water.

In table 3 the setting options are given:

Model Factory setting Setting range

B5 5,3 litres 4,8−5,8 litres

B10 10,6 litres 9,6−11,6 litres

B20 21,2 litres 19,2−23,2 litres

B40 42,4 litres 38,4−46,4 litres

Table 3 Adjusting total amount of water

Fig. 20 Total amount of water

D After having entered the principal user PIN

code fig.20 appears on the display.

D Press programming key (J.).

− The L with the associated value beside the

programming key starts flashing.

D Press selection key (M.)⇓ or (N.)⇑ to select the

desired extra amount of water (table 3 ).

− The enter symbol ↵ appears on the display.

D Press confirmation key (L.) to confirm the

adjustment.

D Press selection key (N.)⇑ to go to the next

setting (§ 7.3.2) or press stop key (K.) to exit

the programming menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bravilor Bonamat B40 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bravilor Bonamat B40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info