Bedienungsanleitung Bravilor Bonamat B40 (Seite 43 von 51) (Englisch)

545947

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

version 1.0ECopyright Bravilor Bonamat B.V.

7.3.8 Lengthening water

delivery time by setting

pauses

The default time required for making a full

container of coffee can be lengthened by setting

pauses. This is, for example, necessary when

very finely ground coffee or very soft water is

used. Then some more time is needed for the

water to go through the coffee filter, otherwise it

will overflow. The capacity is reduced. This is

indicated in %.

− Default setting to 100%, so no pauses.

− The setting range is between 100% and 50%,

to be set in 5% steps. After the setting, the

machine calculates the pause schedule itself.

It can, however, be set to when the first

pause should come.

− The setting must be determined by

experience by making coffee.

− The minimum amount that can be set for the

first pause is the volume of the filter cone

+25%.

Model Contents filter cone Minimum amount first

charge

B5 2 litres 2,5 litres

B10 4 litres 5,0 litres

B20 8 litres 10,0 litres

B40 15 liter 20,0 liter

Table 10 Minimum amount first charge

KLM

Fig. 35 Pause time 100%

D Press selection key (N.)⇑ until fig.35 appears

on the display.

D Press programming key (G.).

− The position beside the programming key

starts flashing.

D Press selection key (M.)⇓ or (N.)⇑ to select the

desired programme.

− The enter symbol ↵ appears on the display.

D Press confirmation key (L.) to confirm the

adjustment.

D Press programming key (I.).

TIP

− This can only be done when the percentage

is not set to 100%.

D Press selection key (M.)⇓ or (N.)⇑ to select the

desired amount of the first charge.

− The enter symbol ↵ appears on the display.

D Press confirmation key (L.) to confirm the

adjustment.

D Press selection key (N.)⇑ to go to the next

setting or press stop key (K.) to exit the

programming menu.

7.3.9 Setting dripping−on time

When the hot water supply through the spray head

has stopped, it will take a while until the filter pan

also stops dripping. The time required for this

varies with different coffee brands and/or grinds.

Therefore this dripping−on time can be changed.

− The default setting is on 120 seconds.

− The setting range is from 0 − 600 seconds in

10 seconds steps.

KLM

Fig. 36 Dripping−on time

The dripping−on time can be set as follows:

D Press selection key (N.)⇑ until fig.36 appears

on the display.

D Press programming key (G.).

− The value beside the selection key starts

flashing.

D Press selection key (M.)⇓ or (N.)⇑ to select the

desired number of seconds.

− The enter symbol ↵ appears on the display.

D Press confirmation key (L.).

− The desired number of seconds has been

set now.

D Press selection key (N.)⇑ to go to the next

setting or press stop key (K.) to exit the

programming menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bravilor Bonamat B40 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bravilor Bonamat B40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info