Bedienungsanleitung Breezy BasiX 2 Plus (Seite 21 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

713921

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

RubiX

HYGIENE WHEN BEING REUSED:

When the chair is to be reused, it should be prepared carefully, and

be wiped and treated with spray disinfectant on all surfaces which

could come into contact with the user.

If you need to do this quickly, you must use a liquid, alcohol-based

disinfectant suitable for medical products and devices.

Please pay attention to the manufacturer’s instructions of the

disinfectant you are using.

Wheelchair pulls to one side

• Check tyre pressure

• Check to make sure wheel turns easily (bearings, axle)

• Check the castor angle

• Check to make sure both castors are making proper contact with

the ground

Castors begin to wobble

• Check the castor angle

• Check to make sure all bolts are secure; tighten if necessary (see

the section on torque)

• Check to make sure both castors are making proper contact with

the ground

Wheelchair squeaks and rattles

• Check to make sure all bolts are secure; tighten if necessary (see

the section on torque)

• Apply small amount of lubrication to spots where movable parts

come in contact with one another

Wheelchair begins to wobble

• Check angle at which castors are set

• Check tyre pressure

• Check to see if rear wheels are adjusted differently

Trouble shooting

Disposal / recycling of materials

NOTE: If the wheelchair has been supplied to you free of charge it

may not belong to you. If it is no longer required follow any

instructions given by the organisation issuing the wheelchair in order

that it may be returned to them.

The following information describes the materials used in the

wheelchair in relation to the disposal or re-cycling of the wheelchair

and its packaging.

Specific waste disposal or recycling regulations may be in force

locally and these should be taken into consideration when disposal

arrangements are made. (This may include the cleaning or

de-contamination of the wheelchair before disposal).

Aluminium: Castor forks, wheels, side frames, armrests, frame, leg

rests, push handles

Steel: Fasteners, QR axle

Plastic: Handgrips, tube plugs, castor wheels, footplates, armpads

and 12” wheel/tyre

Packaging: Low density polythene bag, cardboard box

Upholstery: Woven polyester with PVC coatings and expanded

combustion modified foam.

Disposal or recycling should be done through a licensed agent or

authorised place of disposal. Alternatively your wheelchair may be

returned to your dealer for disposal.

Overall width:

• With standard wheels including handrims, close mount:

RubiX

: SW +19 cm

• With drum brake wheels including handrims, close mounted:

RubiX

: SW +21 cm

Folded dimensions:

• With standard wheels:

RubiX

: 30 cm

• Without standard wheels:

RubiX

: 24 cm

Maximum load:

• RubiX

up to a load of 125 kg

• Reinforced version RubiX

XL up to a load of 170 kg

Weights in kg:

• Transportation (without footrest, wheels, sideguard) 8.4 kg

• Transportation RubiX

XL , (without footrest,

wheels, sideguard): 11.4 kg

• Footrest (unit): 0.8 kg

• Standard sideguard (unit): 0.8 kg

• 24" rear wheels (solid) (pair): 3.8 kg

Technical Data

Maximum occupant mass (test dummy mass): 125 kg, (XL= 170kg)

ALSO SEE PAGE 4

In Accordance with EN12183: 2009 all there listed parts (seat - back

upholstery, arm pad, side panel...) are fire resistant as per EN1021-2 .

The Dynamic safe slope is dependant on the chair configuration, the

users abilities and the style of riding. As the users abilities and style of

riding cannot be predetermined then the max safe slope cannot be

determined. Therefore this must be determined by the user with the

assistance of an attendant to prevent tipping. It is strongly

recommended that inexperienced users have Ant-tips fitted.

The wheelchair conforms to the following standards:

a) Requirements and test methods for static, impact and fatigue

strengths (ISO 7176-8)

b) Requirements for resistance to ignition in accordance with ISO

7176-16 (EN 1021-1)

Unless otherwise advised, the torque for M6 screws is 7 Nm.

Please refer to page 5 for detaials

Torque

Seat Height Adjustment

Please refer to the table on page 5.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Breezy BasiX 2 Plus Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info