Bedienungsanleitung Bremshey Sport TOUR (Seite 7 von 68) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch, Finnisch)

541850

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

OWNER'S MANUAL • PATH

3. Try to slow the belt down by holding onto the

handrails and braking as you walk (as if you were

walking downhill). If the belt slips, turn another

1/4 turn and repeat the test. When braking heavily

the belt may slip. If the belt keeps slipping despite

repeated adjustments, please contact your local

Bremshey dealer.

MALFUNCTIONS

NOTE! Despite continuous quality control, defects

and malfunctions caused by individual components

may occur in the equipment. In most cases it’s

unnecessary to take the whole device in for repair,

as it’s usually sufficient to replace the defective

part. Always give the model, serial number of

your equipment and in case of malfunctions also

conditions of use, nature of malfunction and any

error code.

When you encounter unusual behavior from the

treadmill, simply turn the power switch off, wait 1

minute and turn the power switch on to reset the

treadmill. This should clear incidental errors and

ready the treadmill for normal operation again. If

after you have reset the treadmill by turning the

power switch off and on again, and the treadmill is

still not operational, contact your local Bremshey

dealer for service.

If you require spare parts, always give the model,

serial number of your equipment and the spare part

number for the part you need. The spare part list

is at the back of this manual. Use only spare parts

mentioned in the spare part list.

ERROR CODES

The user interface will display information about

operational faults.

E1: Speed sensor error. Unplug the electrical cord

from the wall outlet and from the treadmill, wait

1 minute and turn the power switch on again. If

treadmill recovers to normal operation, you may

continue to use the treadmill. Otherwise, call the

dealer for service.

E6, E7: Lift motor error. Unplug the electrical cord

from the wall outlet and from the treadmill, wait

1 minute and turn the power switch on again. If

treadmill recovers to normal operation, you may

continue to use the treadmill. Otherwise, call the

dealer for service.

PROTECTIVE CIRCUIT

The machine will shut off when the electricity

load is above the machine’s capacity. To restart the

machine, please follow the procedure below:

A. Unplug the power cord from the machine’s

socket.

B. Push in the safety switch.

C. Replug the power cord into the machine’s socket.

NOTE! DON’T PUSH IN THE SAFETY SWITCH BEFORE

UNPLUGGING THE MACHINE’S POWER CORD.

If you leave the treadmill plugged in after turning

off the console, there will still be current running

to the console. This treadmill is equipped with a

safety control program that will automatically shut

down the machine after six hours of no use. In the

event of an automatic shut down, please follow the

procedure below to restart the treadmill:

A. Unplug the power cord form the machine’s

socket.

Replug the power cord into the machine’s socket to

restart the machine.

MOVING AND STORAGE

After assembly is complete, you may fold the

treadmill into upright position for storage. To do

this, raise the deck until it locks into position.

NOTE! Make sure you hear the click sound of the

deck locking into position. This is to ensure the deck

is locked in place and will not drop back down.

NOTE! Make sure the treadmill’s incline is at 0 before

folding the deck. If the incline is not at 0, folding will

damage the mechanism.

NOTE! This machine has a built-in safety unfolding

feature to help the deck lower slowly. Please make

sure there are no children or other things under the

deck when you lower it.

TO MOVE THE TREADMILL

Before moving the Path, be sure the power cord is

unplugged from the wall and the treadmill. Fold

up the running deck until it is locked and push the

equipment on the transportation wheels. Lower

the treadmill carefully onto the floor. Hold the

handlebar to move forward the treadmill.

NOTE! Transport the treadmill with extreme caution

over uneven surfaces, for example over a step. The

treadmill should never be transported upstairs using

the wheels over the steps, instead it must be carried.

Power

cord

ON/OFF

Safety switch

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bremshey Sport TOUR Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info