632832
16
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
16
(17) CH switch - Select a channel (1-3).
(18) Wall mount hanger - This hole makes it possible to mount the remote
sensor on a wall.
(19) TEST button - Press for a transmission test.
(20) °C/°F button -
This button selects between Celsius (°C) and Fahrenheit (°F).
(21) Stand - Foldable. Use this stand to place the device on a flat surface.
BEFORE YOU START
IMPORTANT!
1. Insert batteries for remote units before doing so for the main unit.
2. Place the main unit as close as possible to the remote unit.
3. Position the remote unit and main unit within the effective transmission range.
When changing batteries always change batteries in the main unit as well as all
remote units and replace them in the correct order, so the remote connection
can be re-established. If batteries are exchanged in only one of the devices (i.e.
the remote sensor) the signal can’t be received or can’t be received correctly.
Note, that the effective range is vastly affected by building materials and position
of the main and remote units. Due to external influences (various RC devices
and other sources of interference), the maximum distance can be greatly
reduced. In such cases we suggest to position the main unit and the remote
sensor at other places. Sometimes all it takes is a relocation of one of these
components of a few inches!
Though the remote unit is weather proof, it should be placed away from direct
sunlight, rain or snow.
POWER SUPPLY
Remote sensor
1. Open the door of the battery compartment (16).
2. Move the CH switch (16) to the position (1-3) that corresponds with the
channel which will be used for transmission (select channel 1 if only one
remote sensor is connected).
3. Install 2 batteries (AAA size 1.5V) strictly according to the polarities shown.
4. Reinsert the battery compartment door.
Main unit
1. Open the door of the battery compartment (11).
2. Install 3 batteries (AAA size 1.5V) strictly according to the polarities shown.
3. Reinsert the battery compartment door.
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bresser 70-07400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bresser 70-07400

Bresser 70-07400 Bedienungsanleitung - Holländisch - 16 seiten

Bresser 70-07400 Bedienungsanleitung - Französisch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info