Bedienungsanleitung Bresser 7001040 - WIFI 4Cast (Seite 29 von 56) (Deutsch, Englisch, Französisch)

771286

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

29 / 56

14. The Wi-Fi connection between smart device/app and weather station will be established automat-

ically. This may take a few minutes. After successful connection, the icons for "Wi-Fi" and for the

signal strength as well as all available weather data will be displayed on the weather station's

screen.

15. NOTICE!In some cases, restrictions on the Internet connection (e.g. connection restrictions

due to firewall settings) may mean that a correct Wi-Fi connection could not be established.

In these cases an "Error" message is displayed in the app. Read the chapter "Troubleshoot-

ing" to find various ways to solve any problems.

11 WeatherSense App Troubleshooting Q&A

Q: Why can’t I connect my weather station to my WIFI network during set up?

• Make sure your phone is connected to a 2.4GHz WIFI network. The weather station currently only

supports 2.4GHz WIFI network during configuration.

• Try moving your WIFI router closer to your weather station (98ft / 30m visible range is best).

• Make sure you have turned off MAC address filtering in your router.

• Make sure you don’t have more than 10 devices connected to your router.

• Close and reopen the WeatherSense app.

• Clear your app cache.

• Hard reset your weather station device, by taking off batteries or removing AC/DC power. Wait for

1 minute and plug back in.

• Make sure the WIFI password you’re inputting is correct.

Q: How do I change my WIFI network to a 2.4GHz WIFI network?

• Make sure your router is a dual band router (most dual band routers support both 5GHz and

2.4GHz networks).

• Under your phone settings, set your WIFI network to 2.4GHz. Most 5GHz WIFI are suffixed by

“_5G”, so select the network that does not have “5G” in it’s name.

• Some routers hide the 2.4GHz WIFI network. If you have trouble finding or setting up your 2.4GHz

network, please contact your router manufacturer for support.

Q: After moving a WIFI weather station to another room or space, the weather station is ap-

pearing as offline. WIFI and signal symbol are blinking on the weather station display. Why is

this happening?

• Check to make sure the WIFI weather station device isn’t placed too far from your WIFI network

router. It must be within 98ft/30m visible range from the router.

• Check to make sure the wireless network has not changed and it is functioning normally.

• If you place the weather station to a new place with a new wireless network Router, then re-config-

ure the weather station with the new network.

Q: Why can’t I locate my town in the app during set up?

• Make sure your phone’s Location Services are turned on and allowed for this app.

• Make sure that your current location can be successfully located in the map. Some cities may fail

to locate because there is no corresponding success in the app. You can manually move the loca-

tion or be automatically positioned to a large administrative level city.

Q: Why does the pairing process always fail? Why can't I find a “weathertype” device in the

device list during the pairing process?

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bresser 7001040 - WIFI 4Cast Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bresser 7001040 - WIFI 4Cast

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info