9 / 20
10 Manual time setting
1. Press the MODE button for approx. 3 seconds to enter the time setting mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press the MODE button to confirm and switch to the next setting.
5. Settings sequence: Year > Month > Day > 12/24-hour mode > Time offset > Hours > Minutes
6. Finally, press the MODE button to save the settings and exit settings mode.
11 Alarm setting
1. Press the MODE button to switch to the settings mode for the alarm time. "AL" is displayed instead
of the seconds.
2. Press the UP button to enable or disable the alarm. When the alarm is enabled, the symbol ap-
pears on the display.
3. Press the MODE button for about 3 seconds to enter the settings mode for the alarm time. The
first value to be set flashes.
4. Press UP or DOWN button to change the value.
5. Press the MODE button to confirm and switch to the next setting.
6. Settings sequence: Hours > Minutes
7. Finally, press the MODE button to save the settings and exit settings mode.
8. When the alarm sounds, press any button to stop the alarm.
12 Weather trend
The weather station will calculate a weather trend for the next 12 hours on basis of the measured val-
ues. It will be displayed as follows:
Illustration3: Weather trend indicators
1 Sunny 2 Partly cloudy
3 Cloudy 4 Rain
13 MAX/MIN Weather data
Maximum and minimum indoor and outdoor temperatures as well as indoor humidity are stored by the
main unit over a period of 24 hours:
1. Press the MEM button repeatedly to display the stored values of the main unit and of the currently
set outdoor sensor one after another.
2. Display sequence: Maximum values (MAX) > Minimum values (MIN) > Current values
3. Press the MEM button for approx. 3 seconds to delete the values of the current recording period.
NOTICE!All values of the current recording period are also deleted with a battery change.
