Bedienungsanleitung Bresser 7002534 WI-FI Colour Weather Station (Seite 21 von 52) (Deutsch, Englisch)

729995

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

LIGHT INTENSITY

TO VIEW THE LIGHT INTENSITY READING

When barometric or index reading is displaying, press [ LIGHT ] key to

show the light intensity reading in same display location.

TO SET THE LIGHT INTENSITY UNIT

When light intensity reading is displaying, press [ LIGHT ] key to change the unit in this sequence: Klux →

Kfc → W/m².

WEATHER FORECAST

The built-in barometer can notice atmosphere pressure changes. Based on the data collected, it can

predict the weather conditions in the forthcoming 12~24 hours within a 30~50km (19~31 miles) radius.

Sunny Partly cloudy Cloudy

Rainy Rainy / Stormy Snowy

NOTE:

- The accuracy of a general pressure-based weather forecast is about 70% to 75%.

- The weather forecast is reecting the weather situation for next 12~24 hours, it may not necessarily

reect the current situation.

- The SNOWY weather forecast is not based on the atmospheric pressure, but based on the temperature

of outdoor. When the temperature is below -3°C (26°F), the SNOWY weather icon will be displayed on the

LCD.

BAROMETRIC PRESSURE

The atmospheric pressure is the pressure at any location of the earth caused

by the weight of the column of air above it. One atmospheric pressure refers

to the average pressure and gradually decreases as altitude increases.

Meteorologists use barometers to measure atmospheric pressure. Since

variation in atmospheric pressure greatly aected by weather, it is possible

to forecast the weather by measuring the changes in pressure.

TO SET THE BAROMETER UNIT

When barometric reading is displaying, press [ BARO ] key to change the barometer unit in this sequence:

hPa → inHg → mmHg

SWITCH BETWEEN ABSOLUTE / RELATIVE

1. When barometric reading is displaying, press and hold [ BARO ] key to enter the setting mode.

2. Press [

] or [ ] key to select ABSOLUTE / RELATIVE reading.

3. Press [ BARO ] key to exit the setting.

TO VIEW THE BAROMETRIC READING AND

When light intensity or index reading is displaying, press [ BARO ] key to show the barometric reading.

WEATHER INDEX

When barometric or light intensity reading is displaying, you can press [ INDEX ] key to view the weather

index in this sequence: HEAT INDEX → DEWPOINT.

HEAT INDEX

The heat index, which is determined by the Wireless 4-in-1 sensor's temperature & humidity data, when the

temperature is between 27°C (80°F) and 50°C (120°F).

Heat Index range Warning Explanation

27°C to 32°C (80°F to 90°F) Caution Possibility of heat exhaustion

33°C to 40°C (91°F to 105°F) Extreme Caution Possibility of heat dehydration

41°C to 54°C (106°F to 129°F) Danger Heat exhaustion likely

≥55°C (≥130°F) Extreme Danger Strong risk of dehydration / sun stroke

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bresser 7002534 WI-FI Colour Weather Station Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bresser 7002534 WI-FI Colour Weather Station

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info