Bedienungsanleitung Bresser 7002535 WI-FI Colour Weather Station (Seite 17 von 55) (Deutsch, Englisch)

729985

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

FIRMWARE UPDATE STEP

1. Download the latest version  rmware (function or WI-FI) to your PC.

2. Set the Console into AP (access point) mode then connect the PC to the console (ref to "SETUP WI-FI

CONNECTION" section in previous page).

3. To update the Function  rmware, click the

Browse

in Function  rmware section and browse to the

location of the  le you download in step 1. To update the WI-FI  rmware, click the

Browse

in WI-FI

 rmware section.

4. Click the corresponding

Upload

to start transfer

the  rmware  le to console (indicated by a transfer

completion %).

Upload

30% ...

BrowseC:\download\PWS_SYS.bin

Upload

Browse

Function firmware version: 1.00

WiFi firmware version: 1.00

5. Once the console received the  rmware  le, it

executes the update automatically as indicated by the

update progress on left top side of the display (i.e.

100 is completion).

e.g. 50% update progress

6. The console will restart once the update completed.

NOTE:

- Function and WI-FI  rmware cannot be updated at the same time, you need to update one by one.

- Please keep connecting the power during the  rmware update process.

- Please make sure your PC's WI-FI connection is stable.

- When the update process start, do not operate the PC and console.

- During  rmware update, the console will temporary stop upload data. It will reconnect to your WI-FI router

and upload the data again once the update success. If the console cannot reconnect to your router and/or

upload the weather data, please enter the SETUP page to setup again.

OTHER SETTING & FUNCTIONS OF THE CONSOLE

CLOCK SETTING

This console is designed to obtain the local time by synchronize with the assigned internet time server. If you

want to use it oﬄ ine, you can set the time and date manually. During the  rst time startup, press and hold the

[ WI-FI ] key for 6 seconds and let the console back to normal mode.

1. In normal mode, press and hold [ CLOCK SET ] key for 2 seconds to enter setting.

2. The setting sequence: Time Zone → DST ON/OFF → Hour → Minute → 12/24 hour format → Year →

Month → Day → M-D / D-M format → Select N/S hemisphere moon phase → Time sync ON/OFF →

weekday Language.

3. Press [

] or [ ] key to change the value. Press and hold the key for quick-adjust.

4. Press [ CLOCK SET ] key to save and exit the setting mode, or the unit will automatically exit the setting

mode 60 seconds later without pressing any key.

NOTE:

- In normal mode, press [ CLOCK SET ] key to switch between year and date display.

- During the setting, you can press and hold [ CLOCK SET ] key for 2 seconds to back to normal model.

Manual_7002535_WS-Wind-Sensor-3in1_en-de_BRESSER_v072019a.indb 17 04.09.2019 12:27:05

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bresser 7002535 WI-FI Colour Weather Station Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info