Bedienungsanleitung Bresser 7802581 (Seite 16 von 48) (Deutsch, Englisch)

784785

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

16 / 48

-800 ~ 800hpa / -23.62 ~ 23.62inHg / -601.5 ~ 601.5mmH g

Setting Range:

SETUP ADVANCED

Language: English

Temperature oC

Outdoor

Indoor

CH 1

CH 2

CH 3

CH 4

CH 5

CH 6

CH 7

Humidity %

Relative Pressure Offset:

Absolute Pressure Offset:

hpa

Range: -20 ~ 20

(Default: 0)

Current offset: 1 0Current offset: -9

Current offset: -5Current offset: 2

Current offset: -2Current offset: 3

Current offset: -2Current offset: 1.2

Current offset: -5Current offset: -0. 2

Current offset: -3Current offset: -20. 1

Current offset: -10Current offset: 11.5

Current offset: -3

(Default: 0)

Current offset: 10

(Default: 0)

Current offset: 0.2

Current offset: -5Current offset: 1

Pressure

Range: -20.0 ~ 20.0 oC

-36.0 ~ 36.0 oF (Default: 0.0)

**UV gain: Range: 0.01 ~ 10(Default: 1.00)

Current gain: 1.1

** Depends on outdoor sensor type

Wind speed gain:

**Wind direction:

Rain gain: Range: 0.5 ~ 1.5(Default: 1.00 )

Range: -10 ~ 10(Default: 0 o)

Range: 0.5 ~ 1.5(Default: 1.00 )

Current gain: 0.8 5

Current offset: 2 o

Current gain: 0.7 5

Function firmware version: 1.00

WiFi firmware version: 1.00

1 Select 'SETUP' to enter the settings menu 2 Select temperature unit

3 Temperature calibration indoor/outdoor

and channel 1-7

4 Pressure calibration section

5 Select 'ADVANCED' to enter the ad-

vanced settings menu

6 Humidity calibration

7 Select pressure unit 8 Enter an offset value to compensate for

the measured pressure value

9 Rain calibration 10 Wind calibration

11 Latest firmware

CALIBRATION

1. User may enter or change the offset and gain values for different measurement parameters while

current offset and gain values are shown next to their corresponding boxes.

2. Once completed, press [Apply] in the SETUP page.

The current offset value will show the previous value that you entered, if you want to change, just input

the new value in the blank, the new value will valid once you press [Apply] icon in SETUP page.

NOTE:

Calibration of most parameter is not required, with the exception of Relative Pressure, which must be

calibrated to sea-level to account for altitude effects.

20 Automatic time setting

After the power supply and the Wi-Fi connection are established, the time and date information is

automatically transmitted by the Internet time server.

If the time/date information is received correctly, the date and time are set automatically and the re-

ception symbol is displayed.

If the time/date information was not received or not received correctly, proceed as follows:

1. In countries/regions whose time zone differs from the coordinated world time UTC, the time zone

must be set manually (see chapter 'Setting the time zone') in order to display the correct time.

2. Press the REFRESH button on the base unit for about 2 seconds to re-initiate the retrieval of Inter-

net time information.

3. Check the W-LAN settings on the base unit for correctness and correct them if necessary so that

an Internet connection can be established (see chapter 'Establishing a W-LAN connection').

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bresser 7802581 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bresser 7802581

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info