730014
18
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
18 / 24
15 BLUETOOTH button 16 VOLUME DOWN button
17 VOLUME UP button 18 Loudspeaker
19 DC connection socket for coaxial/barrel con-
nector
20 UP button (value change upwards or time
mode selection)
21 DOWN button (value change downwards or
temperature unit selsction)
22 RADIO/SLEEP button (turn on/off the radio or
stop the alarm)
23 ALARM ON/OFF button (enable or disable the
alarm)
24 MODE button (time mode selection and set-
tings)
25 Antenna compartment 26 Cable antenna
27 DC power adapter with EU mains plug. 28 Power cable with coaxial/barrel connector
Scope of delivery
RC alarm clock (A), mains adapter (B), instruction manual
NOTICE
Do not touch the touch-sensitive area when setting up the device!
Do NOT touch the touch-sensitive area during the automatic time signal reception or when making any
manual settings! Touching the touch-sensitive area will activate functions and which will block all other
functions.
6 Establishing the power supply (mains operation)
1. Put the DC connector into the connection socket of the device.
2. Put the mains plug into the power outlet.
3. The device is energized directly.
7 Automatic time setting
After the power supply was established, the clock will automatically search for the radio signal. This
will take approximately 3 to 8 minutes to finish this process.
If the radio signal is received correctly, the date and time will be set automatically and the radio control
signal icon turns on.
If the clock fails to receive the time signal, go ahead with the following steps:
1. Press and hold the DOWN button for approx. 2 seconds to re-initialize radio signal reception.
2. Is the device still not receiving the signal, the time must be set manually.
Read the detailed manual for more information about manual time and alarm time settings (see down-
load information on page 2).
8 Setting up a Bluetooth connection
NOTICE!To use the Bluetooth function, a Bluetooth-enabled terminal device (e.g. Smartphone,
computer, etc) is needed which is not included.
1. Enable Bluetooth function on the Smartphone and switch to Bluetooth settings.
2. Press and hold the BLUETOOTH button on the device for approx. 3 seconds until a signal tone
sounds. The Bluetooth function indicator lights red.
3. Select 'Bresser WakeUp' from the list in the Bluetooth settings of the Smartphone. The connection
will be set up. After a successful connection, another signal tone will sound and the function indic-
ator will light yellow. The RC alarm clock can now be used as a loudspeaker for the Smartphone.
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bresser 8010080 MyTime Sunrise BT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info