Bedienungsanleitung Bresser 9080600 WIFI Weather Center 7in1 (Seite 61 von 96) (Deutsch, Englisch, Spanisch)

784773

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

61 / 96

Supported internet browsers Internet browser that support HTML 5

51 Troubleshooting

Problem Solution

The 7-in-1 wireless sensor

connection is interrupted or

has no connection

1. 1. Make sure that the sensor is within the transmission range.

2. 3. If it still does not work, reset the sensor and resynchronize it with

the base station.

The wireless indoor sensor is

temporarily interrupted or dis-

connected

1. 1. Make sure that the sensor is within the transmission range.

2. 2. Make sure that the displayed channel matches the channel selec-

tion on the sensor

3. 3. If it still does not work, reset the sensor and resynchronize it with

the base station.

No WIFI connection 1. Check whether the WIFI symbol is shown on the display. It should al-

ways be displayed.

2. 2. Make sure that you connect to your WIFI router using the 2.4G

band and not the 5G band.

Data is not sent to wunder-

ground.com or weather-

cloud.net.

1. 1. Make sure that your Station ID and Station Key are correct.

2. Make sure that the date and time on the tablet are correct. If they are

incorrect, you may be reporting old data rather than real-time data.

3. Make sure that your time zone is set correctly. If it is set incorrectly,

you may report old data rather than real-time data.

Wunderground Precip. Ac-

cum. Total graph offset 1

hour reset time (during sum-

mer time)

1. 1. Make sure that the device's time zone is correctly set to Wunder-

ground.

2. 2. Make sure that the time zone and daylight saving time on your

base station are correct.

3. If you have located your station outside the U.S. time zone region in

Wunderground, daylight saving time is invalid. To solve this problem,

please disable the DST function in the base station.

Rainfall is not correct 1. 1. Please keep the rain collector clean

2. 2. Make sure that the tipping bucket inside can function smoothly.

Temperature reading too

high during the day

1. 1,5. Place the sensor in an open area and at least 1.5 m above the

ground.

2. 2. Make sure that the sensor location is not too close to heat gener-

ating sources or obstacles such as buildings, pavement, walls, or air

conditioning units.

52 EC declaration of conformity

Hereby Bresser GmbH declares that the radio equipment type with 9080600 complies with

Directive 2014/53/EU. The full text of the EC declaration of conformity is available at the

following Internet address www.bresser.de/download/9080600/CE/9080600_CE.pdf

53 UKCA Declaration of Conformity

Bresser GmbH has issued a "Declaration of Conformity" in accordance with applicable

guidelines and corresponding standards. The full text of the UKCA declaration of conform-

ity is available at the following internet address: www.bresser.de/download/9080600/

UKCA/9080600_UKCA.pdf

Bresser UK Ltd. • Suite 3G, Eden House, Enterprise Way, Edenbridge, Kent TN8 6HF,

Great Britain

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bresser 9080600 WIFI Weather Center 7in1 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bresser 9080600 WIFI Weather Center 7in1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info