Bedienungsanleitung Bresser MCX Goto Serie (Seite 6 von 40) (Englisch)

784592

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

-6-

Assembly

The field tripod

With the field tripod a MCX telescope can be mounted in Alt/Az mode, as well as

Equatorially. An equatorial wedge, comprising of a tilt plate and height adjustment bar,

is built into the tripod

The parts:

- Tripod with attached tilting plate and height adjustment bar unit with clamp.

- Two mounting screws for mounting the MCX telescope on the tilt plate

- spreader clasp, spring, two washers and knurled nut to attach the spreader clasp to the

tripod

- Three clamping bolts for height adjustment of the tripod legs

Assembling the tripod

1. Spread the legs of the tripod (1, Fig. 11) as far as they will go.

2.Slidethespreaderclasp(6,Fig.12)overthecentralthreadedrod.

3. Slide the washer and then thread the knurled nut (7, fig. 13) on to the threaded rod.

Tighten the nut.

4.Adjusttheheightofthetripodbylooseningtheleglockingbolts(8,fig.14)andpullout

theinnertripodlegtothedesiredlength.Thentightenthelockingbolts(8)untiltheleg

is firmly held in place.

IMPORTANT NOTE!

Tighten the central knurled nut until the tripod legs are stable and do not wobble or slip

(do not overtighten).

Alt/Azimuth, or Equatorial placement?

The rotation of the earth causes astronomical objects to proscribe an arc as they appear

travel through the sky. This apparent movement is not noticeable when observed with

the naked eye. When observing with a telescope like the MCX, however, this speed of

movement seems quite high. If the telescope drive is not activated, celestial objects

disappearfromthefieldofviewoftheeyepiecewithin15to60seconds.Thespeedof

the movement depends on the magnification used. This movement can be compensated

by positioning the telescope correctly and activating the drive. The two basic ways to

mount a telescope are Altitude/Azimuth (up/down – left/right) and Equatorial.. When

using the handheld computer, the MCX usually does not have to be mounted Equatorially.

ThehandheldcomputerenablestheAlt/Aztrackingofthetelescopeforpracticallyall

types of observations.

Fig. 11

Fig. 12

Fig.Fig. 13 13

Fig. 14

Step one: Spread the tripod legs (1) as far as

they will go.

Step two: Slide the spreader clasp (6) over the

central threaded rod

Step three: Slide the washer and then the lock

nut (7) onto the threaded rod. Tighten the nut.

Step four: Adjust the height of the tripod by

loosening the locking screw (8) and pulling out

the inner tripod leg to the desired length. Then

tighten the locking screw (8) again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bresser MCX Goto Serie Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bresser MCX Goto Serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info