Bedienungsanleitung Bresser MCX Goto Serie (Seite 7 von 40) (Englisch)

784592

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

- 7 -

Assembly

Alt/Az Positioning

The Alt/Az position of the telescope is ideal for quick observation of terrestrial and

astronomical objects. The telescope is swivelled in horizontal and vertical direction.

Alt/Az mounting of the telescope

1.Loosentheheightadjustment barclampingbolt (4,fig.15) andadjustthetiltplate

(2,fig.15)facingslightlyupwardssothatyoucaneasilyreachtheundersideofthe

plate. Now retighten the tilt plate height adjustment bar clamping screw so that the unit

cannotslipwhenthetelescopeismounted(seeFig.15).

2. Place the telescope on the tilt plate so that the side panel is to the left of the pole height

adjustment (1, fig. 17). Then place the other threaded hole over the other fixing screw

and hand-tighten both screws (see figure). 15).

3. Hold the telescope by the tilting plate and carefully loosen the tilt plate height adjustment

barscrew(4,fig.15)andlowerthetiltplateuntilitishorizontal(tilttheplatedownto

the stop, this is the horizontal position). Retighten the height adjustment bar screw to

lock the tilt plate in a horizontal position.

4. Release the altitude axis clutch on the telescope’s fork arm and adjust the optical tube

ascloselyaspossibleto0degrees(horizontal)onthealtitudesettingcircleandthen

tighten the clamp again.

5. Release the azimuth axis clutch and slowly rotate the optical tube counterclockwise by

hand until it reaches the mechanical end stop.

6. Then slowly rotate the optical tube back again by hand until the telescope opening

points exactly north and tighten the clamp firmly again.

7. You have now reached the azimuthal start position. Now start an alignment method

(1-star, 2-star, etc.) to use the Goto function or move the telescope manually with the

direction keys.

Operation of an azimuthally mounted telescope

Your MCX is now azimuthally mounted on the field tripod (Fig. 17). The telescope can

be swivelled horizontally and vertically. When using the handheld computer (standard

equipmentontheMCX-102/127),theMCXcanbeusedinazimuthalmode.Thehandheld

computer then automatically tracks celestial objects simultaneously in horizontal and

vertical axes after a successful 1-star, 2-star, or 3-star alignment has been performed

(seep.24).Ifyousetupthetelescopeazimuthally,thedirectionofthetripodisarbitrary.

The legs of the field tripod can point in any direction. However, the tilting plate and the

tube must be horizontal. The tube opening must also face north (N, Fig. 17).

IMPORTANT NOTE!

To achieve a quick and precise horizontal alignment of the tripod, use the standard built-

in circular bubble (12, fig. 2) the telescope mount. The tripod is sufficiently levelled as

soon as the air bubble is within the circle mark.

Loosen the pole height clamping screw.

Fig.Fig. 16 16

Mounting the MCX on the tilting plate of the

tripod.

Azimuthal alignment: Tilt plate and tube are

horizontal. The tube opening faces north (N)

Fig. 15

Fig. 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bresser MCX Goto Serie Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bresser MCX Goto Serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info