562815
83
Zoom out
Zoom in
Vorherige Seite
1/112
Nächste Seite
77
Other ways to update your BrightSign software
1 Download the latest software.
a
Go to the BrightSign web site
www.brightsign.biz/support
.
b
Click the
Software Downloads
link.
c
Compare the software version number with the number on your BrightSign screen.
d
If your BrightSign software is older than the software on the web site, click the
Software
link
for the appropriate model (HD600 or HD2000) to download the latest software.
2 Extract the software update file onto your CF/SD card and give it one of the following
names:
UPDATE.ROK: Use this file name if you want to auto-delete the update file after the
update is complete. This is useful when you want to distribute the update to the field on
the same CF/SD card that contains the presentation content. After the first boot, your
BrightSign automatically runs any auto-run content on the CF/SD card.
UPDATE_SAVE.ROK: Use this file name if you want to keep the update file on the CF/SD
card after the update is complete. This is useful when you want to use the same CF/SD
card to update multiple BrightSigns.
UPDATE_NEWER.ROK (HD2000 only): Use this file name if you want to apply the update
only if the version is newer than the version currently on your BrightSign. The update file
is not deleted.
UPDATE_DIFFERENT.ROK (HD2000 only): Use this file name if you want to apply the
update only if the version does not match the version currently on your BrightSign. The
file is not deleted.
3 Insert the CF/SD card into your BrightSign and apply power.
HD600:
Wait for your BrightSign to boot. (The display will be blank.) After several seconds one
of the LEDs on the front panel starts to flash. When the LED stops flashing, the upgrade is
complete. If you’re using the UPDATE.ROK method, BrightSign reboots automatically.
HD2000:
Wait for your BrightSign to boot. (The display will be blank, but the LEDs on the front
panel light as the unit boots.) Wait for the red upgrade LED to light up. During the upgrade,
the connector activity LEDs turn on and off to indicate that the upgrade is in progress.
83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BrightSign HD600 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info