Bedienungsanleitung Brita On Line Active Plus (Seite 5 von 92) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

504590

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

ENGLISH 5

3 On Line Active Plus Kit – easy installation

Before starting, please check that you have all the components

listed above (see ﬁ g. 1) as well as the recommended tools.

There are 7 steps to the installation.

Prior to installation, read the Technical Data (chapter 7) and

the Important Information (chapter 9). After storage and

transport below 0°C, the product must be stored in the open

original packaging for at least 24 hours at the stated ambient

temperatures (chapter 7) for operation.

3.1 Step 1: Selecting the carbonate hardness

setting (++/+) on the ﬁ lter head

The ﬁ lter head has been set to meet most UK water conditions.

In some soft water areas though, you may wish to adjust the ﬁ lter

head to your local settings. To do so, ﬁ rst carry out a carbonate test

using the supplied testing strip. The strip can be found in the outer

wrapping of these Usage Instructions.

Using the testing strip:

• Let the red response ﬁ eld of the probe soak in a glass of your

tap water for 1 second.

• After 1 minute, compare the colour of the response ﬁ eld with

the table and read the appropriate setting from the table.

Depending on the colour of the testing strip, we recommend

setting your ﬁ lter head as follows:

Setting + ++

(ﬁ g. 2)

(ﬁ g. 3)

Colour

Red, orange,

yellow

Green, dark

green

Capacity 1000 L 500 L

German Carbonate

Hardness [°dH]

up to 8.5 above 8.5

English Carbonate

Hardness [°eH]

up to 10.6 above 10.6

French Carbonate

Hardness [°fH]

up to 15.2 above 15.2

Grains per Gallon CaCO3

[gpg CaCO3]

up to 8.9 above 8.9

Milligram per Litre CaCO3

[mg/L CaO3]

up to 151 above 151

The ﬁ lter head is set to “++” by default. To change the setting,

use an Allen key (5 mm). Turn in the direction of the arrow until

the “+” appears in the window.

The ﬁ lter head contains a ﬂ ow regulator already installed which

guarantees smooth water ﬂ ow from your dispenser even at higher

water pressures.

3.2 Step 2: Starting the BRITA electronic

cartridge exchange indicator

A Beginning:

The BRITA electronic cartridge exchange indicator comes with "++"

setting and is already installed in your BRITA water dispenser.

– To start, pull off the strip in the direction of the arrow.

– The BRITA electronic cartridge exchange indicator's LED will

blink once red and once blue. If the BRITA water dispenser's

lever is turned to the open position, the LED will start blinking

blue continuously.

B Inserting the BRITA electronic cartridge exchange

indicator for the “+” setting

If you have changed your ﬁ lter head to the “+” setting, please

consider that the electronic cartridge exchange indicator also has to

be changed.

a Take out the BRITA electronic cartridge exchange indicator (seen

as black rubber piece) from the bottom of the lever of the BRITA

water dispenser.

b Take the battery out carefully from the "++" indicator and put it

into the other cartridge exchange indicator in the separate bag,

marked with a “+”.

c The “+”-side of the battery has to be on top. As soon as the

battery has full contact a red and a blue light, on the back of the

BRITA electronic cartridge exchange indicator will blink once.

This shows that the BRITA electronic cartridge exchange indica-

tor has been set.

d Put the “+” BRITA electronic cartridge exchange indicator into

the faucet. The side with the battery has to face the BRITA logo

on the lever. Now the LED will blink blue when you turn the

BRITA water dispenser's lever to the open position

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brita On Line Active Plus Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info