08
09 10
11
01 02
07
03
04
06
05
12
14
13
15
17
16
19
18
20
Please observe the instructions on the use of child restraint systems de-
scribed in your vehicle owner
The seat may be used in all vehicles equipped with the ISOFIX anchoring
systems. Please consult your vehicle owner
seats which are approved for child safety seats in the weight class 0-18 kg.
The fastening with ISOFIX and support leg is based on semiuniversal
approval. The seat may be used only in those vehicles cited in the enclosed
vehicle type list. This type list is constantly updated. The latest version can
be obtained from us or from www
Y
USE IN THE VEHICLE
Shoulder pads
Harness buckle
Headrest
Cover
ISOFIX insert guides
ISOFIX attachement points (car) Shoulder straps
01
02
03
04
05
06
07
ISOFIX indicators
Recline button
Adjustment strap
Adjusting button Release button
08
09
10
Fabric loop
11
Locking arms
12
13
14
Support leg
15
16
Support leg indicator
Rotation button
17
Adjustment buttons
18
T
•
that the child safety seat may have been damaged, but that the damage may
not be immediately obvious. In this case the child safety seat must be replaced.
Please dispose of it properly
•
components in particular are all in perfect working order
•
between hard objects (car door
•
dropped).
•
•
the DUALFIX² R exactly as described in this manual.
Please observe the waste disposal regulations in your
country
Disposal of packaging Container for cardboard
Cover Residual waste, thermal utilisation
Plastic parts In accordance with the labelling in the
designated container
Metal parts Container for metals
Harness straps Container for polyester
Buckle &latch Residual waste
CARE INSTR
1) In the direction of travel 9-18 kg /
2) In the direction of travel 9-18 kg: if there is a front airbag: Slide the passenger
seat a long way back and refer to any instructions in vehicle owner
Against the direction of travel 0-18 kg: DO NOT use on a passenger seat with a front
airbag!
0–18 kg
9–18 kg
In the direction of travel Y1)
Against the direction of travel Y1)
With 2 point or 3 point vehicle belt No
On seats featuring:
ISOFIX attachments (between seat surface and backrest) Y2)
(Please observe the applicable regulations in your country)
BRIT
child safety seat
T-
cording to ECE* R 44/04
Group Body weight
DUALFIX² R 0+ & 1 0 to 18 kg
• The child safety seat has been designed, tested and certied according to the requirements of the Euro -
pean Standard for Child Safety Equipment (ECE R 44/04). The test mark E (in a circle) and the certica-
tion number are located on the orange certication sticker (sticker on the child safety seat).
• This certication will be invalidated if you make any modications to the child safety seat.
• The DUALFIX² R child safety seat must only be used to secure your child in the vehicle. It must never be
used as a seat or toy in the home.
• Risk of injury due to unauthorised modications! Unauthorised technical modications may reduce or
entirely void the seat´s protective properties. Do NOT make any technical modications to the child seat.
• Use the child seat only as described in the user instructions.
*ECE = European Standard for Child safety Equipment
Storage compartment
19
20
DUALFIX² R base
User instructions GB
0–18 kg
9–18 kg
0~4 y
DU
ww
2000032107
19/02
CARE AND MAINTENANCE
Care for the harness buckle
It is vital for the safety of your child that the harness buckle works correctly
Malfunctions of the harness buckle are usually caused by accumulations of dirt or
foreign bodies. Malfunctions are as follows:
•
pressed.
•
try to push them in).
•
•
•
Remedy
W
Cleaning the cover
Please be sure to use only genuine BRIT
as the seat cover is an integral part of the child safety seat which plays an
important role in ensuring that the system works properly
covers are available from your retailer
•
•
washing machine‘s cycle for delicate items (30 °C). Please observe the
instructions on the washing label of the cover
•
cleaning agents (such as solvents).
•
•
CAUTION! Never remove the buckle latches 21 from the straps.
CAUTION! The child seat must not be used without the seat cover
Removing the cover
04
07
21
10
26
1. Grasp the recline button
and move the seat shell 26 downwards into the
upright position.
2. Loosen the harness straps as far as possible.
3. Open the harness buckle 07 (press the red button).
4. Slide the headrest 04 to its lowest position.
5. Remove the cover of the headrest 04 .
6. Open the poppers on the left and right of the rear part of the cover.
7. Unhook the elastic seam of the cover under the edge of the seat shell.
TIP: Start at the handles on the side and at the upper edge of the seat shell.
8. Pull the cover up and over the bezel of the strap adjuster.
9. Feed out the harness buckle 07 and the end of the strap from the cover.
10. Pull the cover upwards a little and then put it with the cutout over the headrest
04 .
Retting the Cover:
Simply follow the steps in the opposite order
CAUTION! Check that the harness straps are not twisted and that they have
been correctly inserted in the belt slots on the cover
Removing the shoulder pads:
28 32
31
30
29
05
06
1. Loosen the 5-point harness of the child seat as much as possible. Unhook the
shoulder straps 06 on the backside of the childseat from the
connecting piece 28 .
2. Pull below both, the shoulder pads 05 and the two shoulder straps 06 to the
front through the slots 29 . (Frontside of the childseat)
3. Slide the belt loops 32 off of the plastic extensions 30 of the shoulder belt
height adjuster 31 .
4. Pull the shoulder pads 05 through the slots 29 to the front.
5. Remove the shoulder pads 05 from the shoulder straps 06 .
Retting the shoulder pads:
Simply follow the steps in the opposite order
CAUTION! Never use the child seat without correct installed shoulder pads.
EASY A
When used in rearward facing mode:
Group 0+ (0-13 kg)
Group 1 (9-18 kg)
1.Press the grey rotation button 20 and
turn the seat 90° into the Easy
mode
CAUTION! Before every journey:
make sure that the rotating part of the
child seat is fully engaged by making
sure the child seat is in a xed position.
When used in forward facing mode:
Group 1 (9-18 kg)
1. Press the grey rotation button 20
and turn the seat 90° into the Easy
Access mode
CAUTION! Before every journey:
make sure that the rotating part of the
child seat is fully engaged by making
sure the child seat is in a xed position.
The DUALFIX² R 360° seat rotation which makes it easier to get your child into or
out of the child seat (Easy
20
10
BRITAX RÖMER
Kindersicherheit GmbH
Theodor-Heuss-Straße 9
89340 Leipheim
Germany
BRITAX EX
1 Churchill Way W
Andover
Hampshire SP10 3UW
United Kingdom
T
F
E.: service.de@britax.com
www
T
F
E.: service.uk@britax.com
www
