767935
2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
ŹNote and follow the instructions in the vehicle handbook.
Risk of injury from front airbag
Airbags are designed to protect adults. If the child seat is too close to the front
airbag, slight or serious injuries can arise.
ŹFor rear-facing use, disable front airbag.
ŹIf the child seat is secured on the passenger seat, slide the passenger seat
backwards.
ŹIf the child seat is secured on the second or third row of seats, slide the
corresponding front seat forwards.
ŹNote and follow the instructions in the vehicle handbook.
Risk of injury during use
The temperature in a vehicle can rise dangerously quickly. In addition, it is
dangerous to leave the vehicle on the side facing the street.
ŹNever leave a child unsupervised in the vehicle.
ŹOnly fasten or remove seat module from the footpath-side.
Risk of injury from unsecured objects
In the case of an emergency stop or accident, unsecured objects or people
may cause injury to other occupants in the vehicle.
ŹNever secure your child by holding them tightly on your lap.
Ź6HFXUHEDFNUHVWVRIWKHYHKLFOH¿QGHJHQJDJHIROGDEOHUHDU
ŹSecure all heavy or sharp-edged objects in the vehicle (e.g. on the parcel
shelf).
ŹDo not place objects in the foot well.
ŹEnsure that everyone in the vehicle has their seatbelts fastened.
ŹEnsure that the product is always secured when it is in the car, even if no
baby is being transported.
Risk of injury due to missing seat cover
The seat cover is an integral safety component of the child seat. If the seat
cover is not used, this may lead to serious or even fatal injuries.
ŹOnly use original BRITAX RÖMER replacement seat covers.
ŹReplacement seat covers are available from your retailer.
How to avoid damaging the product
ŹNever use product in a free-standing position, even for testing.
ŹProduct is not a toy.
ŹEnsure that the product is not trapped between hard objects (car door, seat
rails, etc.).
ŹKeep product away from: Damp, moisture, liquids, dust and salt spray.
ŹDo not lean heavy objects on the product.
5LVNRILQMXU\DVDUHVXOWRISURKLELWHGPRGL¿FDWLRQ
7KLVDSSURYDOLVLQYDOLGDWHGLI\RXPDNHDQ\PRGL¿FDWLRQVWRWKLVSURGXFW
Changes may only be made by the manufacturer. The stickers on the product
are an important component of the product.
ŹDo not make any changes.
ŹDo not remove stickers.
Avoid damaging the vehicle
ŹSensitive car seat covers may be damaged.
ŹUse a BRITAX RÖMER child seat base. These are available separately.
5. Use in the vehicle
WARNING! This product is approved exclusively for use with the FLEX
BASE iSENSE base station.
ŹNote and follow instructions for the FLEX BASE iSENSE.
)Fastening this child seat to the base station is described in the instructions
for the FLEX BASE iSENSE.
6. Cleaning and care
ŹClean plastic parts with soapy water.
ŹDo not use abrasive cleaning agents (e.g. solvents).
Clean cover
Remove cover
ŹLoosen the shoulder straps. See chapter "Shoulder straps and headrest"
page 1. 01
ŹPress red button to open the belt lock. 12
4. Safety information
Risk of injury from damaged child seat
In the event of an accident at a collision speed of more than 10 km/h, the child
seat may be damaged without the damage being immediately visible. Serious
injuries may result from another accident.
ŹReplace product following an accident.
ŹHave damaged product inspected (even if it has fallen onto the ground).
ŹRegularly check all important parts for damage.
ŹEnsure that all mechanical components work properly.
ŹNever lubricate or oil parts of the product.
ŹProperly dispose of the damaged product.
Risk of burns from hot components
Components of the product can become hot in direct sunlight. Children's skin is
sensitive and maybe harmed as a result.
ŹProtect the product against intensive direct sunlight when not in use.
Risk of injury if installed incorrectly
If the product is installed or used other than as described in the operating
instructions, serious or even fatal injuries may result.
ŹOnly use on a car seat facing the direction of travel.
ŹExtend headrest as far as possible. See chapter "Shoulder belt and head
rest" page 1.
ŹLoosen cover hooks on the headrest.
ŹLoosen the cover from the headrest and pull forwards.
ŹLoosen rubber loops under the headrest.
ŹRemove cover from the headrest.
ŹLoosen push buttons. 13
ŹRelease Velcro on the padded crotch.
ŹLoosen rubber loops and plastic cards in the leg area.
ŹRemove cover from the edge of the seat.
ŹCarefully remove cover from the control elements (DUALFIX iSENSE).
ŹRemove cover.
WARNING! Never use product without cover.
Wash cover
ŹNote information on the washing label.
Attach cover
ŹProceed as above in the reverse order.
Clean shoulder pads
Remove shoulder pads 14
ŹLoosen the shoulder straps. See chapter "Shoulder straps and headrest"
page 1. 01
ŹPress red button to open the belt lock.
ŹUndo Velcro.
ŹOpen lock.
ŹPull shoulder straps out slightly.
ŹHang belt loops from the plastic web.
ŹPull shoulder pads out from the front.
WARNING! Never use product without shoulder pads.
Wash shoulder cushion
ŹNote information on the washing label.
Attach shoulder pads
ŹProceed as above in the reverse order.
Look after harness buckle
Dirt and foreign objects can impair the function of the harness buckle. Look
after the harness buckle if the buckle tongues only lock into the harness buckle
ZLWKGLႈFXOW\LIDWDOO
Remove harness buckle 15
ŹRemove cover from the seat.
ŹTurn the crotch strap with the metal plate 90°.
ŹSlide the metal plate through the harness slot with the narrow edge facing
forwards.
Clean belt lock
ŹSoak the harness buckle for an hour in warm water with cleaning agent.
ŹRinse harness buckle and leave to dry.
Fit belt lock 16
ŹSlide the metal plate of the harness buckle through the belt slot.
ŹTurn the crotch strap with the metal plate 90°.
ªMetal plate is at right angles to the direction of travel.
ŹCheck fastening by pulling hard on the harness buckle.
ŹThread harness buckle through cover.
ŹAttach cover to seat.
7. Temporary storage of product
If you do not use the product for a longer period, please note the following
information.
ŹStore product in a secure and dry location.
ŹMaintain storage temperature between 20 and 25 °C.
ŹDo not lean heavy objects on the product.
ŹDo not store product directly next to sources of heat or in direct sunlight.
The following also applies to the DUALFIX iSENSE:
ŹCharge battery before temporary storage.
ŹFully charge the battery at least every 12 months.
8. Disposal
Please follow the disposal regulations applying in your country. Do not disman-
tle this product.
The DUALFIX iSENSE must be disposed of with electrical waste.
14
16
13
click
12 15
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Britax-Romer DUALFIX 3 i-SIZE wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Britax-Romer DUALFIX 3 i-SIZE

Britax-Romer DUALFIX 3 i-SIZE Bedienungsanleitung - Deutsch - 2 seiten

Britax-Romer DUALFIX 3 i-SIZE Bedienungsanleitung - Holländisch - 2 seiten

Britax-Romer DUALFIX 3 i-SIZE Bedienungsanleitung - Französisch - 2 seiten

Britax-Romer DUALFIX 3 i-SIZE Bedienungsanleitung - Portugiesisch - 2 seiten

Britax-Romer DUALFIX 3 i-SIZE Bedienungsanleitung - Spanisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info