8. PREP
P
Before proceeding, please r
installation method.
Installation methods A2 and B2 only (ISOFIT)
01
02
1.
the two insertion aids 02 (which are included in the scope of delivery of
the seat*) onto 01 of your vehicle with the
opening pointing upwards.
Tip! The ISOFIX fast
backrest of the vehicle seat.
* The insertion aids make it easier to install the child safety seat when using the ISOFIX
fastening points and they prevent damage t
they must be removed from the child safety seat and kept somewher
with a fold-down backrest, the insertion aids must be removed before folding down the
backrest. Pr
and on the hook. Remove soiling or external objects t
Installation method A only (group 1 / 9-18 kg)
2.A Make sure that the 5-point harness has been installed correctly (see 5.).
3.A Adjust the headrest 16 of the child safety seat as appropriat
of your child (see 8.1).
Installation method B only (groups 2 + 3 / 15-36 kg)
2.B Remove the 5-point harness (see 5).
3.B Adjust the headrest 16 of the child safety seat as appropriat
of your child (see 8.2).
ALL installation methods
4.
Adjust the child safety seat to achieve the desired angle
of inclination.
F Move the spacer
wedge 12 to the rear position.
FMove the spacer
wedge 12 to the front position.
8.1 Adjusting the headrest (installation with 5-point harness)
A correctly set headrest 16 ensures that the shoulder straps 13 are optimally
positioned, and gives your child optimum protection.
The headrest 16 must be adjusted so that the shoulder
straps 13 are at the same level as your child’s shoulders.
WARNING! The shoulder str13 are not allowed
to run behind your child's back, or level with/above
their ears.
T
1. Loosen the 5-point harness of the child safety seat
to the maximum possible ext
Rear of the child safety seat:
2. Tilt the shoulder str 24 upwards and
move it at the same time to set the shoulder str
13 to the correct height. T
adjuster 24 in the ideal position for your child,
simply let go of it.
5. Place the child safety seat facing forward (in the direction of tr
suitable vehicle seat.
6. If the headrest of the vehicle seat prevents the child safety seat fr
fastened in place properly, it should be r
of your vehicle).
After removing the headr
it cannot be thrown around.
Tip! If you find that the vehicle seat belt is t
process, try using the child safety seat in the upright seating position.
7. Unscrew the SIC 08 anti-clockwise (on the side
closer to the vehicle door) until there is a distance of
5mm between it and the vehicle door or until it has been
unscrewed to the maximum.
9. Installation
GROUP 1 (9-18 kg)
Installing the seat with the vehicle's 3-point seat belt
A1
The
EVOL
is installed permanently in the vehicle by means of
the vehicle's 3-point seat belt. Y
harness of the child safety seat.
1. Carry out the steps in Section "8. PREP.
2. Go to Section A2 and follow the steps relating tvehicle's 3-point seat belt .
3. Give the child safety seat a firm pull forwards to ensure that it is securely fast
4. Secure your child as described in Section "9.1 Buckling in your child using
the 5-point harness".
5. Carry out the steps in Section "9.3 Checklist" .
GROUP 1 (9-18 kg)
Installing the seat with ISOFIT
and the vehicle's 3-point seat belt
A2
The
EVOL
is installed permanently in the vehicle by means of
the ISOFIT system and the vehicle's 3-point seat belt. Y
in using the 5-point harness of the child safety seat.
2.4 Push the ISOFIT locking arm 07 int
02 until the ISOFIT locking arm 07 engages with a
clicking sound.
DANGER! Check that the ISOFIT locking arm 07 is
correctly engaged by pulling on it.
3. V
3.1 Place the diagonal seat belt section 25 between the
headrest 16 and the backrest 04 of the child safety
seat. Ensure that the belt is not twisted.
CAUTION! During the subsequent st
make sure that none of the belts/str
3.2 26 in the light red belt
guide 20 .
2.3 Pr06 to ensure
that the hook on the ISOFIT locking arm 07 is open
and ready for use.
2.7 06 to ensure
that the hook on the ISOFIT locking arm 07 is open
and ready for use.
2.8 07 int
aid 02 until the ISOFIT locking arm 07 engages with
aclicking sound.
DANGER! Check that the ISOFIT locking arm 07 is
correctly engaged by pulling on it.
2. ISOFIT 1/3
2.1 Open the cover flap that is furthest from the vehicle
door 09 .
2.2 10 down and
fully extend the ISOFIT locking arm furthest fr
vehicle door 07 .
2.5 Open the cover flap that is closest to the vehicle
door 09 .
2.6 Hold the ISOFIT adjustment button 10 down and
fully extend the ISOFIT locking arm closest t
vehicle door 07 .
1. Carry out the steps in Section
"8. PREP.
3.4 T
slightly
3.5 Guide the vehicle seat belt through the first feed-
through point 15 of the backrest 04 from the front.
3.6 Guide the vehicle seat belt back through the second
feed-through point 15 from the back t
engage the buckle tongue in the vehicle seat belt
buckle 34 so that it makes an audible clicking sound.
3.7 Place the diagonal seat belt section 25 and lap belt
section 26 on the side of the vehicle seat belt buckle
into the light red belt guide 20 on the vehicle seat
belt buckle 34 .
3.8 Using one knee, press down hard on the child safety
seat. At the same time, firmly tug the diagonal seat
belt section 25 at the bottom (where it connects t
the vehicle seat belt buckle) to pull it up.
3.9 Hold the diagonal seat belt section firmly at the
bottom, and pull the diagonal seat belt section 25
forwards above the feed-through point 15 . T
weight o the child safety seat and pull the diagonal
seat belt section 25 to tighten it up again.
The vehicle seat belt buckle 34 must not
be positioned in the light red belt guide 20 .
4. ISOFIT 2/3
4.1 Firmly pull the ISOFIT adjusting straps 29 on the left
and right one after the other while at the same time
pushing the child safety seat backwards.
4.2 Store the ISOFIT adjusting str 29 in the openings
on both sides that are intended for this purpose and
then close the cover flaps 24 again on both sides.
5. ISOFIT 3/3 and the vehicle's 3-point seat belt
Give the child safety seat a firm pull forwards to ensure that
it is securely fastened and check the ISOFIT locking arms
07
again to ensure that both ar
9.1 Buckling in your child using the 5-point seat belt
The more snugly the belt fits over your child's body, the better they will be
protect
1. 19 (press the red release
button).
2. 22 while at the same
time pulling both shoulder straps 13 below the
shoulder pads 18 forwards.
3.
4. 16 has been set correctly
and adjust it if necessary [see 8.1].
5.
backrest of the child safety seat.
6. 30 together and
connect them to each other before inserting them
into the harness buckle 19 (there should be an
audible clicking sound).
7. 13 to tight
section and make sure that the harness is lying flat.
WARNING! The hip belt 35 must lie as low as
possible over your child's hips.
8. 23 until there is an audible
clicking sound.
CAUTION! P 23 straight
forwards (not diagonally up or down). Pull the
shoulder pads 18 back down.
9. 23 another pull until there is
an audible clicking sound to indicate that the harness
has been tightened suciently
8.2 Adjusting the headrest (3-point seat belt)
A correctly set headrest 16 ensures that the diagonal seat belt section 25 is
optimally positioned, and gives your child optimum protection.
The headrest 16 must be adjusted so that there is a
space two fingers wide between the headrest 16 and
your child's shoulders.
T
1. Move the shoulder strap adjuster 24 to its top
position (see 8.1).
The
EVOL
is not installed permanently in the vehicle. It is simply
secured together with your child using the vehicle's 3-point seat belt.
1. Carry out the steps in Section "8. PREP. Ensure that the
backrest 04 is flush with the backrest of the vehicle seat.
2. Carry out the steps in Section "9.2 Buckling in your child using the
3-point seat belt".
GROUP 2-3 (15-36 kg)
Installing the seat with the vehicle's 3-point seat belt
B1
GROUP 2-3 (15-36 kg)
Installing the seat with ISOFIT
and the vehicle's 3-point seat belt
B2
The EVOL is installed permanently in the vehicle by means of the ISOFIT
system. Y 3-point seat belt .
1. Carry out the steps in Section "8. PREP.
2. Go to Section A2 and follow the ISOFIT steps described there.
3. Give the child safety seat a firm pull for
fastened and check the ISOFIT locking arms 07 again to ensur
are fully locked in place.
4. Follow the steps in Sections 9.2 and 9.3 .
9.2 Buckling in your child using the 3-point seat belt
4. 25 and lap belt
section 26 on the side of the vehicle seat belt buckle
34 into the light red belt guide 20 of the child safety
seat.
DANGER! The vehicle seat belt buckle 34 must
not be positioned in the light red belt guide 20 .
6.
Guide the diagonal seat belt section
25
into the dark
red belt holder
17
of the headrest
16
until it lies
completely inside the belt holder
17
and is not twisted.
Tip! If the backr
04
conceals the belt holder
17
,
you can adjust the headrest
04
upwards. The diagonal
seat belt section
25
can now be easily inserted. Now
return the headrest
16
to the proper height.
7. 25 runs over your
child's shoulder
Tip: Y 16
again in the vehicle.
DANGER! The diagonal seat belt section 25 must
run diagonally backwards. Y
course of the belt with your vehicle's adjustable belt
deflector
DANGER! The diagonal belt 25 must never be
directed forwards t
In this case, use the child safety seat on the back
seat only
8.
diagonal seat belt section 25 .
1.
2.
child to the vehicle seat belt buckle 34 .
DANGER! Ensur
as otherwise the full protective eect of the retaining
system is not ensured.
3.
Engage the buckle tongue in the vehicle seat belt
buckle
34
so that it makes an audible clicking sound.
5. 26 on the other side
of the seat cushion in the light red belt guide 20 .
DANGER! The lap belt section 26 must lie as
low as possible over your child's hips on both sides.
9.3 Checklist
F
►the child safety seat is securely fastened,
►the straps ar
►the SICT 08 is being used correctly,
►the headrest 16 has been correctly adjust
Installation method A only (group 1)
►the diagonal seat belt section 25 runs between the headrest 16 and the
backrest 04 ,
►the straps of the child safety seat ar
the child,
►the buckle tongues 30 are engaged in the harness buckle 19 ,
►the shoulder pads 18 are in the right position on your child's body
Installation method B only (groups 2+3)
►the diagonal seat belt section 25 runs through the dark red belt holder 17 of
the headrest 16 ,
►the lap belt 26 runs in the bright red belt guides on both sides of the seat
cushion 20 ,
►the diagonal seat belt section 25 on the side of the vehicle seat belt buckle
34 also runs through the light red belt guide 20 of the child safety seat,
►the diagonal seat belt section 25 runs diagonally backwards,
►the vehicle seat belt buckle 34 is not positioned in the bright red belt guide
20 in the seat cushion.
Installation methods A2 and B2 only (ISOFIT)
►the child safety seat is slotted in on both sides with the ISOFIT locking arms
07 in the ISOFIT fastening points 01 .
CAUTION! T
• Certain car seat covers made from more sensitive mat
etc.) may sustain signs of wear and tear when using child safety seats. F
optimum protection of your car seat covers, we r
RÖMER car seat protect
2. Remove the 5-point harness (see 5.).
3. Have your child sit down in the child seat.
4. Press the headrest adjuster 03 on the back of the
headrest 16 .
►This unlocks the headrest.
5. Y16 to the
desired height. As soon as you release the headr
adjuster 03 , the headrest 16 will lock into place.
6. Check the height. If the headrest 16 is still too high
even when in the lowest position, you can make an
additional adjustment with the shoulder strap adjust
24 as described in Section 8.1.
3.3
section 25 and the lap belt section 26 .
19
30
19
16 03
07
25
25
17
25
16
26
20
25
26 20
34
34
12 12
08
16
13
25
04
20 26
15 04
15
16 24
07
16
02
07
06
07
10
09
07
07
02
07 06
07
10
09
34
25 26
34
25
25
19
13
18
22
23
18
07 35
07
16
04
29
04
16
25
24
25
20
160908_EVOLVA_123_SICT_DRAFT_GB_GRAFIKEN.indd 2 9/7/2016 9:04:57 PM
