08
01 02
03
04
10
12
14
13
07
KIDFIX XP
KIDFIX XP SICT
15 to 36 kg
(~4 to 12 years of age)
User instructions
GB
www
IT No. 2000010039 13/07
05
06
11
Belt guide (bright red)
Release knob
XP-SICT (only KIDFIX XP
Belt holder (dark red)
ISOFIX insert guides
ISOFIX fastening points (vehicle)
ISOFIT locking arms
01
02
03
04
05
06
07
Backrest
Seat cushion
ISOFIT settings key
Safety button
Storage compartment
08
09
10
XP-P
11
Adjusting handle of the headrest
12
13
14
Removing the seat cover
1. Moving the headrest of the vehicle seat into the top
position.
2. Unhook the cover hook
19
on the rear of the backrest.
3. Remove the top part of the cover and fold it forwards to
the seat surface.
4. Unhook the cover hook
19
on the front of the backrest.
5. Pull the cover of
Removing the headrest cover
6.
Unhook the cover loop
20
on the rear of the backrest.
7. Unhook the cover hook
19
on the front of the backrest.
8.
Pull off the cover of the headrest
03
.
► The cover can now be washed.
Please observe the
instructions on the washing label of the cover:
Re-tting the cover
Proceed in reverse order to put on the cover
5. CARE AND MAINTENANCE
19
20
19
19
03
09
2. INTRODUCTION
We are delighted that our
KIDFIX XP / KIDFIX XP
can safely accompa-
ny your child through a new stage in its life.
In order to protect your child correctly
KIDFIX XP/
KIDFIX XP SICT
must always be used and installed as described in these instructions.
If you have any further questions regarding its use, please feel free to contact us:
BRITAX RÖMER
Kindersicherheit GmbH
Blaubeurer Straße 71
D-89077 Ulm
Germany
T
F
E.: info@de.britaxeurope.com
www
BRITAX EX
LIMITED
1 Churchill Way W
Andover
Hampshire SP10 3UW
United Kingdom
T
F
E.:
helpline@uk.britaxeurope.com
www
These instructions use the following symbols stated below:
Symbol Keyword Explanation
DANGER! Risk of severe personal injury
W! Risk of minor personal injury
CAUTION! Risk of material damage
TIP: Useful notes
Instructions that follow a set sequence are numbered.
Example:
1. Press the button...
16
15
Belt guide colours
For better differentiation, the two vehicle seat
belts are highlighted in different colours.
agonal seat belt
16
in dark red and the lap belt
15
in bright red. The colour of the belt guides
on the child safety seat follows the same colour
scheme.
4. USE IN THE VEHICLE
Please observe the instructions for using children's restraining systems in the operating
instructions of your vehicle. The seat can be used in vehicles with ISOFIX anchoring systems
(see type list) and in vehicles with a 3-point belt.
Please nd the information on the seats approved for child safety seats of the weight classes 15 to
36 kg in the operating instructions of your vehicle.
The KIDFIX XP / KIDFIX XPis approved for two different methods of installation:
Symbol Installation type Approval type Section
with the ISOFIT locking arms on the
ISOFIX fastening points in the vehi-
cle. Observe the vehicle type list.
semi-universal
a)
9A
with the vehicle's 3-point seatbelt
universal
9B
a)
This means that the child safety seat may only be used in vehicles that are listed in the
vehicle type list enclosed. This type list is consistently kept up to date. The latest version
can be obtained from us or from www
Y
In the direction of travel Ye
Against the direction of travel no
1)
with 2-point belt no
with 3-point belt
2)
Ye
with ISOFIX fastening points
(between seat surface and
backrest)
Ye
on front passenger seat Y
3)
on outer rear seat Ye
on centre rear seat (with
3-point belt)
Y
4)
1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only
if the vehicle seat is also approved for use by adults. The seat may not be in the area of effect
of an airbag.
2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on
belt with an "E" or "e" in a circle).
3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions
in vehicle owner's manual.
4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
15–36 k
3. Certif
BRIT
Child safety seat
T
In accordance with ECE* R 44/04
Group Body weight
KIDFIX XP
KIDFIX XP SICT
II+III 15 to 36 kg
*ECE = European Standard for Child Safety Equipment
The child safety seat has been designed, tested and certied according to
the requirements of the European Standard for Child Safety Equipment (ECE
R 44/03). The seal of approval E (in a circle) and the approval number are
located on the orange approval label (sticker on the child safety seat).
DANGER!
to the child safety seat. Only the manufacturer is permitted to
make modications to the child safety seat.
W Use the KIDFIX XP
ing your child in your vehicle. It is in no way suitable as a
seat or toy in the home.
DANGER!
belt. If you secure your child in the child seat with only a
2-point belt, then in the event of an accident this may cause
serious injuries to your child, possibly resulting in death.
P
6. DISASSEMBL
Please ensure that you only use the original BRIT
covers, as the seat cover is an integral part of the child safety seat and fulls im-
portant functions to ensure the smooth operation of the system. Replacement seat
covers are available from your dealer or from an
• The cover can be removed and washed with a mild detergent in the delicates
programme of the washing machine (30 °C). Please observe the instructions
on the washing label of the cover
• The plastic parts and the XP-P
any caustic cleaning agents (such as solvents).
DANGER! The child seat must not be used without the seat cover
1. PRODUCT O
1. Operate the release key of your vehicle seat buckle
2. Open the XP-P
11
on the V
remove the diagonal belt
16
.
3. Open the dark red belt holder
03
by pressing back-
wards the key on the belt holder
03
and unthread-
ing the diagonal belt
16
.
Only for installation type
4. T
safety button
08
and the red release button
07
rst
on the one and the on the other side opposite on
another
►The child safety seat can now be removed.
DANGER! the child safety seat must always be
secured when it is in the vehicle, even if no child is
being transported.
03
DISPOSAL:
Please observe the waste disposal regulations in your country
Disposal of packaging Container for cardboard boxes
Seat cover Residual waste, thermal utilisation
Plastic parts According to the labelling in the
corresponding container
Metal parts Container for metals
Belt straps Container for polyester
buckle and tongue Residual waste
16
11
08
REMO
UNF
1. T
TIP! The XP-P
belt of your vehicle, the diagonal belt must be retensioned before every
journey; see: Section10 step 12 [page II].
