ISOFIT locking arms
Safety button
Belt guide (bright red)
Belt holder (dark red)
ISOFIX insertion aids
ISOFIX fastening points (automobile)
Release knob
01
02
03
04
05
06
07
Seat cushion
XP
SecureGuard
ISOFIT adjustment button
Backrest
08
09
10
Adjusting handle of the headrest
11
Stor
12
13
14
Removing the seat cover
1. Moving the headrest of the vehicle seat into the t
position.
2. Unhook the cover hook 18 on the rear of the backrest.
3. Remove the t
the seat surface.
4. Unhook the cover hook 18 on the fr
5. Pull the cover o of the seat surface.
Removing the headrest cover
6.
Unhook the cover loop
19
on the rear of the backrest.
7. Unhook the cover hook 18 on the front of the backrest.
8.
Pull o the cover of the headrest
21
.
ŹThe cover can now be washed.
Please observe the
instructions on the washing label of the cover:
Re-fitting the cover
Proceed in r
5. C
2. INTRODUC
Thank you for choosing
KIDFIX Z-LINE
to keep your child safe thr
stage of their life.
In order to prot
KIDFIX Z-LINE
must always be
used and installed as described in these instructions.
If you have any further questions regarding its use, please feel fr
These instructions use the following symbols stated below:
Symbol Keyword Explanation
DANGER! Risk of sever
WARNING! Risk of minor personal injury
CAUTION! Risk of mat
TIP: Useful notes
Instructions that follow a set sequence are numbered.
Example:
1. Press the button...
16
15
Belt guide colours
For bett
belts are highlighted in dier
diagonal seat belt 16 in dark red and the lap belt
15 in bright red. The colour of the belt guides
on the child safety seat follows the same colour
scheme.
4. USE IN THE VEHICLE
Please observe the instructions for using children's restraining syst
tions of your vehicle. The seat can be used in vehicles with ISOFIX anchoring systems (see type
list) and in vehicles with a
3-point belt.
Please find the information on the seats approved for child safety seats of the weight classes 15 to
36 kg in the operating instructions of your vehicle
.
The KIDFIX Z-LINE is approved for two dierent methods of installation:
Symbol Installation type Approval type Section
with the ISOFIT locking arms on the
ISOFIX fastening points in the vehicle.
Observe the vehicle type list.
semi-
universal
a)
9A
with the vehicle's 3-point seatbelt universal 9B
a) This means that the child safety seat may only be used in vehicles that are listed in the
vehicle type list enclosed. This type list is consistently kept up to dat
be obtained from us or from www.britax-r
Y
In the direction of tr Y
Against the direction of tr No 1)
with 2-point belt No
with 3-point belt2) Ye
with ISOFIX fastening points
(between seat surface and
backrest)
Ye
on front passenger seat Y3)
on outer rear seat Y
on centre rear seat (with
3-point belt) Y4)
1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only if the vehicle
seat is also approved for use by adults. The seat may not be in the area of eect of an airbag.
2) The safety belt must be approved to ECE R 16 or a compar
belt with an "E" or "e" in a circle).
3) If there is a front airbag: Slide the vehicle seat a long way back and r
in vehicle owner's manual.
4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
15-36 k
3. CERTIFC
BRIT
V
seat
T
In accordance with ECE* R 44/04
Group Body weight
KIDFIX Z-LINE
II+III 15 to 36 kg
*ECE = European Standard for Child Safety Equipment
The child safety seat has been designed, tested and certified accor
requirements of the Eur
44/04). The seal of approval E (in a circle) and the appr
on the orange appr
DANGER!
the child safety seat. Only the manufacturer is permitted t
modifications to the child safety seat. The child seat is approved
for use both with and without XP-P
WARNING!
KIDFIX Z-LINE
exclusively for securing your child in
your vehicle. It is in no way suitable as a seat or toy in the home.
DANGER!
belt. If you secure your child in the child seat with only a 2-point
belt, then in the event of an accident this may cause serious
injuries to your child, possibly resulting in death.
P
6. DISASSEMBL
Please ensure that you only use the original BRIT
covers, as the seat cover is an integr
important functions to ensure the smooth oper
seat covers are available from your dealer
• The cover can be removed and washed with a mild deter
progr
the washing label of the cover
• The plastic parts and the XP-P
any caustic cleaning agents (such as solvents).
DANGER! The child seat must not be used without the seat cover
1. PRODUC
1. Oper
2. Open the XP 10 on the V
remove the diagonal belt 16 .
3. Open the dark red belt holder 03 by pressing
backwards the key on the belt holder 03 and
unthreading the diagonal belt 16 .
Only for installation type A (ISOFIT):
4. T
safety button 07 and the red r06 first
on the one and the on the other side opposite on
another
ŹThe child safety seat can now be removed.
DANGER!
secured when it is in the vehicle, even if
no child is being transport
DISPOSAL:
Please observe the waste disposal regulations in your country
Disposal of packaging Container for cardboard bo
Seat cover Residual waste, thermal utilisation
Plastic parts According to the labelling in the
corresponding container
Metal parts Container for metals
Belt straps Container for polyester
buckle and tongue Residual waste
REMOV
UNF
1. T
TIP! The XP-P
of your vehicle, the diagonal belt must be retensioned befor
see: Section 10 step 12 [page II].
KIDFIX Z-LINE
User instructions GB
15 kg - 36 kg
(~4 Y - 12 Y)
ww
2000033624 - 09/19
ww
07
01 02
03
09
11
13
12
06
04
05
10
14
08
19
19
18
21
03
16 10
07
18
BRIT
Kindersicherheit GmbH
Kindersicherheit GmbH
Theodor-Heuss-Str
89340 Leipheim
Germany
+49 (0) 8221 3670 199
BRIT
1 Churchill Way W
Andover
Hampshire SP10 3UW
United Kingdom
+44 (0) 1264 386034
BRIT
Jörgen Kocksgatan 4
SE-211 20 Malmö
Sweden
www.britax-roemer
BRIT
