Bedienungsanleitung BRK PRO-D1610 (Seite 30 von 48) (Englisch)

606724

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Page 30

Next conﬁgure DDNS settings in the DVR

From the Network Setup menu, enter Primary or Secondary DNS from the WAN

settings of your router in the DNS ﬁeld

1. Click DDNS SETTINGS.

2. Under DDNS, select ON.

3. Under SERVICE, select DYNDNS if you obtained your domain name from

DynDNS.com.

4. Under DOMAIN NAME, enter your DDNS domain name you received

from the conﬁrmation email. For example, if your domain name is adam@

dyndns.com, you need to enter adam@dyndns.com, in the text ﬁeld using

the Virtual Keyboard.

5. Enter your DDNS user name and password in the respective ﬁelds.

6. Click APPLY. Click OK in the conﬁrmation window.

7. Click EXIT. The system will prompt you that it must restart. Click OK.

Port Forwarding

Port Forwarding allows computers and devices outside of your network to communicate with the DVR. You will need to forward

ports 80, 100 and 9000 from the attached router to the IP address of the DVR. Gather the make, model and IP address of the

router. If you changed the default router login, then you will need to know the user name and password for that router. Follow

these steps:

Step 1: How to Determine the IP Address of the DVR

NOTE! The DVR and PC must be connected to the same router and both must be

powered up before proceeding.

1. Select DHCP from the TYPE drop down box in the NETWORK SETUP

Menu. You should see the message “Getting IP...” The router will assign an

IP address.

2. Restart the DVR.

3. Once the DVR has restarted, reopen the Network Setup window and the

IP address of the DVR will now be listed. This is the address to which

you will forward ports 80 and 9000. If you plan to access your DVR via a

smartphone, you will need to forward port 100 as well. Be sure to conﬁgure

the Mobile Network screen of this DVR with port 100. See Mobile Phone

Setup in this manual for details.

Step 2: Conﬁgure your Router for Port Forwarding

NOTE: Although all routers are different, the following is the basic information

that needs to be conﬁgured. Consult your Router Manual for details on Port

Forwarding conﬁguration for your speciﬁc router. Some Internet Service

Providers (ISP) may block access to these settings in the router they provide.

You may need to contact your ISP to make these changes for you.

1. Access your routers’s Port Forwarding screen (See image at right). Your’s

may be slightly different but the information required is the same.

2. Enter your port forwarding information for each port you want to forward.

As noted above you will need to forward ports 80, 100 and 9000.

• Assign a name

• Start Port: 80; End Port: 80

• Enter your DVR IP address you obtained from “Step 1: How to

Determine the IP Address of the DVR”

• Click Apply and repeat for the remaining ports.

DDNS Setup

Network Setup-Getting IP Address

REMOTE Access

Network Setup

Port Forwarding Screen from Router

Port Forwarding Naming Tip

For clarity and easier identiﬁcation of ports in your router we suggest naming the ports as follows: Port 80 is for

your Web Browser - name this port “DVR-Web”. Port 9000 is for streaming media - name this port “DVR-Media”.

Port 100 is for your mobile phone - name this port “DVR-Mobile”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BRK PRO-D1610 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info