Bedienungsanleitung BRK PRO-DC8410-600 (Seite 15 von 48) (Englisch)

606726

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Page 15

Password Setup

Setting Up Passwords & User Permissions

When you ﬁrst startup your DVR, you are automatically logged in as the ADMIN under Device ID: 000000. By default, passwords

are disabled on the system. You will not need a password to log in or access menus. You will not need a password to access your

system using the browser-based remote software.

The system employs two levels of user authorities connected to a Device ID. The levels are as follows:

1. ADMIN (administrator): Has full control of the system, and can change both administrator and user passwords and enable/

disable password checking

2. USER (normal user): Only has access to live viewing, search, playback, and other limited authorities.

For security reasons, it is highly recommended to enable passwords on your sys-

tem. If you enable passwords, you must select an 1-8 digit ADMIN password and a

1-8 digit USER password. The ADMIN and USER passwords must not be the same.

If you forget your password, contact First Alert Consumer Affairs for help in reset-

ting. For your security you will be required to verify proof of ownership by providing

a notarized letter. See BRK website for the “Notarized Statement Of Ownership

For Security System Override Pass Codes” form to be completed.

To customize PASSWORD settings, click BASIC from the Main Menu, then click

PASSWORD. You are now in the User Setup menu. From here you can change the

DEVICE ID. Note this is not a required for a basic setup:

1. Device ID: Click the ﬁeld beside Device ID and enter a 6-digit numerical Device

ID using the Virtual Keyboard.

Next, in the USER SETUP Menu click CONFIG to set up users. NOTE: Only the Ad-

ministrator can enter the CONFIG setup. You can change the

• STATE: active or not (Note for User Set #1, ADMIN, the STATE of ACTIVE or

INACTIVE cannot be changed.)

• USER NAME: Assign or change user name using the virtual keyboard.

• PASSWORD ENABLE: enable or disable the password for this user

• PASSWORD: Password must be 1-8 digits

• CONFIRM: conﬁrm the password

• PERMISSION: Select all permissions for this user. (NOTE: this option is not

available for ADMIN as they have all permissions). Available choices are:

Record Setup, HDD Manage, Language Setup, Time Setup, Start/Stop Record,

Display Setup, Alarm Setup, System Info, Motion Detect, Mobile Setup, System

Setup, PTZ Setup, Network Setup, Video/Audio Set, IE Preview for each of 8

Channels, Playback for each of 8

Channels.

Navigate the PERMISSION

Screens by:

• NEXT: Moves to next selecting

page.

• ALL: Selects all permissions.

• CLEAN: Clears all permissions.

NOTE: This page is working

for administrator. Administra-

tor can assign permissions for

user. User just can see but can

not change their permissions.

Multi User Login

After Users are set up, Select active user from USER NAME drop down box to log on with pre-

viously set up permissions. The active user(s) will be available. Next, key in the device ID and

user password.

initial setup

system operation

User Setup

User Permission Screen 1 User Permission Screen 2

User Login-Multi Users

User Password Setup

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BRK PRO-DC8410-600 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info