Bedienungsanleitung BRK PRO-DC8410-600 (Seite 44 von 48) (Englisch)

606726

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Page 44

FAQ

If your problem is not listed below, please call our toll-free number for more support.

Tech Services: 800-323-9005

Question: Why is the DVR not working after starting?

Answer:

• Check the power adaptor input

• Check the on-off power line, is it well-connected?

• Check the power on-off switch on the back of the unit

• Check the main board of DVR is connected properly

Question: Why is the DVR rebooting automatically or stopping for several minutes after starting?

Answer:

• Instability or low input voltage

• Bad track on hard drive or the hard drive is bad

• Insufﬁcient power supply

• Instability of the front-end video signal

• High temperature, too much dust, bad DVR operating environment

• Check to make sure the main board connector is secure

• The hardware of DVR is defective

Question: Why is there no video output on single, multi or all channels?

Answer:

• Please check the adaptor of camera whether to see if it is well-connected

• Please check the cable for connecting video input/output in the back panel of DVR

• Please insert the video source directly into the display device and check if they are causing the problem.

• Check the brightness of the picture and bring it back to its original default setting

• No video input signal or too weak

• In Display Setup, Live View is set to OFF for a particular channel

• The DVR hardware is defective

Question: Why can’t the DVR record after startup and why is there an “H” showing on the screen?

Answer:

• Make sure power adaptor is DC 12V

• Make sure hard drive is formatted

• Check the power and data connection cables of the hard drive

• The hard drive is defective

• The SATA port is not working

Question: What is the meaning of the letters “R”, “M”, “I”, “H” and “B” showing on the screen?

Answer:

• “R”means the channel is recording

• “M” means motion detection on the channel

• “I” means alarm on the channel

• “H” means either the hard drive is not installed, it is bad or full or needs formatting

• “B” means Tamper Alarm has been activated

Question: Why is the DVR having a problem with real-time images, such as bad image color or serious brightness dis-

tortion?

Answer:

• If PAL and NTSC are not correctly selected, the images will be in black and white and rolling

• DVR is not compatible with monitor

• The video transmission distance (cable run) is too long. You may need to upgrade to RG59 Coax BNC/DC Power cables for

runs longer than 60 feet.

• The setting of DVR color settings need to be adjusted

Question: Why is there no audio sound when monitoring?

Answer:

• Check sound box or speaker functions. Also check possible short circuit.

• Audio source may be connected to the video channel. You can click to full-screen to check.

• The hardware of DVR is defective

• Cameras are not audio capable or no powered microphone is connected.

• Mute is enabled

Appendix

FAQ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BRK PRO-DC8410-600 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info