Bedienungsanleitung BRK PRO-DC8810-600 (Seite 18 von 48) (Englisch)

606725

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Page 18

Basic Operation

Recording

recording

RECORD Mode

Conﬁgure Recording Options:

In this Menu you have three recording options: POWER UP (Continuous), TIMER

RECORD (enables SCHEDULE menu) and ALARM (within SCHEDULE menu). By

default, the DVR is set to record continuously. Set parameters as follows:

1. From the Main Menu click RECORD. Under SWITCH, use the drop-down menus

and select ON/OFF to enable/disable recording from the selected channel. Note:

If SWITCH is set to OFF, then Motion Detect, Alarm and Manual Record are also

disabled for that channel.

2. Under RESOLUTION, select CIF, HD1, or D1.

NOTE: NTSC: @30fps, PAL: @25fps. Recording capabilities for both NTSC & PAL:

Channels 1 & 2: D1, HD1, CIF; Channels 3-8: HD1, CIF.

3. BITRATE (Kbps): See table for details.

4. FRAMERATE: Choose the recording frame rate 1-30, (fps – frames per second).

The lower the value, the less life-like and more jerky the recorded movements

will be. However, a lower frame rate uses less HDD space. Make your choice

depending on the precision with which you want to follow the events being

recorded. Frame-rate of each channel can be adjusted but is limited by the total

resources available. The total frame rate for all channels combined cannot exceed

420 (NTSC) fps. Note: Although the chipset is NTSC 480, part of the resources are

used for other internal functions and cannot be allocated to recording resources.

The ratios of D1, HD1 and CIF are as follows: 1 D1= 4 x CIF, 1 HD1 = 2 x CIF.

5. AUDIO, select ENABLE or DISABLE. If audio recording is enabled, the system will

record audio from connected audio capable cameras (not included). See caution state-

ment on audio recording in Video/Audio section.

6. REC. MODE, select POWER UP or TIMER RECORD. If you select POWER UP, the

system will record continuously when the system is powered on. If you select TIMER

RECORD, you have to set a recording schedule on the system.

7. REC. SIZE (Record Size), select 15MIN, 30MIN, 45MIN, or 60MIN.

NOTE: Record Size sets the ﬁle size for recorded video ﬁles on the system. Instead of recording data as one large ﬁle, the system

will divide the data into blocks of 15, 30, 45, or 60 minutes. This makes the recorded data easier to search

8. MASK FIELD lets you block a speciﬁc portion of a channel you do not want recorded or shown on the display screen. This can be

useful if you need to conceal a sensitive area being captured by the camera. See next section for details.

9. Click APPLY. Click OK in the REMARK window. Click EXIT.

Recording Schedule (TIMER RECORD)

You can program the DVR to record according to a customized recording schedule.

The Schedule Grid shows the days of the week and hour blocks 00~23. You can set

Alarm Recording (Red), General Recording (Green), or No Recording (Blue) to each

time block of each day. To set a recording schedule:

1. Open the Main Menu and click RECORD.

2. Under REC. MODE, select TIMER RECORD.

3. Click SCHEDULE. The Schedule menu opens.

4. Under CHANNEL, select speciﬁc channels or select ALL.

5. Below the grid, click either ALARM (red), GENERAL (Green), or NO RECORD

(Blue) and then click a time block on the desired day.

6. Use the FROM/TO drop-down menus to copy the schedule of one day to

another. For example, if you want your schedule for Monday to be the same on

Wednesday: under FROM select MON, under TO select WED, and then click COPY.

7. Click APPLY. Click OK in the REMARK window. Click EXIT.

Record Menu

Recording Schedule

CCTV Resolution

CCTV resolution is measured in vertical and horizontal pixel dimensions and typically

limited by the capabilities of both the camera and the recorder that you are using for

your CCTV surveillance installation. CCTV systems use an analog video signal. For

television speciﬁcations (which CCTV uses) the highest resolution that can be captured

and stored is 704 x 480 (NTSC for the United States) and 720 x 576 (PAL for Europe). This resolution

is known as D1 resolution. A high end CCTV recorder is capable of recording at up to D1 resolution.

CCTV Resolutions

D1: 704 x 480

HD1 (2CIF): 704 x 240

CIF: 352 x 240

QCIF: 176 x 120

Bitrate in Kbps

Image

Quality

Low Medium High

CIF

384 512 768

HD1

512 768 1024

896 1024 1280

Basic Setup Menu

Basic Setup

Use the BASIC SETUP menu to conﬁgure language, date and time settings,

password setup, along with display, video and audio settings. You can also exit

the system through this menu. The Basic Setup menu contains the following

sub-menus: Language, Date/Time, Password, Display, Video/Audio and Exit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BRK PRO-DC8810-600 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info