Bedienungsanleitung Brose Bristol E-Touring (Seite 21 von 26) (Englisch)

780273

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

c) Drive Unit

• Observe all safety information and instruc-

tions, both in this manual and in all other ma-

nuals enclosed with the e-bike.

Failure to follow the safety instructions may result

in electric shock, ﬁre and/or serious injury.

• Keep these operating instructions in a safe

place for future reference.

• Never open the drive unit. This is maintenan-

ce-free and may only be repaired by qualiﬁed

personnel and using original spare parts.

This ensures the safety of the drive unit. Unauthori-

zed opening of the drive unit will void the warranty.

• All components belonging to the e-bike system

as well as components which are mounted on

the drive unit (e.g. chainring, chainring holder,

pedals) may only be exchanged for compo-

nents approved by the bicycle manufacturer.

This protects the drive unit from damage (e.g. due

to overload).

If the e-bike system is accidentally activated, there

is a risk of injury.

• The pushing aid may only be used when actu-

ally pushing the e-bike.

If the wheels of the e-bike do not have contact

with the ground when using the pushing aid, there

is a risk of injury.

• Do not make any changes to your e-bike

system. Do not attempt to increase the per-

formance of your e-bike system.

Otherwise, you will reduce the service life of the

components and risk damage to the e-bike sys-

tem and the e-bike. In addition, any manipulation

of the e-bike system will void any warranty and

guarantee claims on your e-bike. Improper hand-

ling of the system will also endanger your own sa-

fety and that of other road users.

By making unauthorized changes to the e-bike

system, you risk high personal liability costs or

even criminal prosecution in the event of accidents

caused by manipulation.

• Observe all national regulations for the regis-

tration and use of e-bikes.

• Caution: Touching the motor housing may

cause burns.

Intended Use

The drive unit is intended exclusively for driving

your e-bike and must not be used for other pur-

poses.

Operation

For information on operating your e-bike with the

Brose drive, please refer to the operating instruc-

tions of the control unit.

Driving Information and Tips

When does the e-bike drive work?

The Brose e-bike system enables the cyclist to be

supported by an electric motor in a Pedal Elect-

ric Cycle (PEDELEC). The support depends on the

force applied to the pedals by the cyclist. Support

from the e-bike drive is therefore only provided

when the cyclist pedals. This applies regardless of

the support level.

The e-bike drive switches itself off automatically at

speeds above 25/45 km/h. If the speed falls below

25/45 km/h, the support automatically resumes.

One exception is the push aid function, which all-

ows the e-bike to be pushed more comfortably at

low speeds without pedaling. When using the pus-

hing aid, the pedals can also rotate.

You can ride the e-bike like a normal bicycle at any

time without support.

Familiarization

Take some time to get used to the e-bike before

you use it in normal trafﬁc. Test the different levels

of support until you feel conﬁdent using the pro-

duct. Before longer rides, gain experience of how

different parameters and environmental conditions

affect the range of your e-bike.

Safety Information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brose Bristol E-Touring Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info