Bedienungsanleitung Brose e-Bike (Seite 16 von 24) (Englisch)

684070

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

button(28) is pressed. Each LED here corresponds to

about 20 % of capacity. When the battery pack(26) is

fully charged, all ﬁve LEDs light up. The charge level of

the switched-on battery pack(26) is also shown on the

display in the display unit(1) (see „Battery charge and

remaining range“ on page 11). If the capacity of the

battery pack (26) is below 10 %, the ﬁrst LED of the

charge level display(27) ﬂashes.

The battery pack(26) can be charged with and without

the display unit (1). Without the display unit (1), the

charging operation can only be tracked at the charge

level display(27) of the battery pack (26). The display

unit(1) can be removed during charging or ﬁtted only

after the charging operation has started. The charge

level is indicated by the charge level display(27) on the

battery pack(26) and by the bar(13) on the display unit.

During charging, the LEDs of the charge level dis-

play(27) on the battery pack(26) light up. Each steady

LED corresponds to about 20 % of capacity. The ﬂas-

hing LED shows the charging of the next 20 %.

During charging, the charge level display(27) is as fol-

lows:

LED steady LED ﬂashing Charge level

- 1 0-19%

1 2 20-39%

1, 2 3 40-59%

1, 2, 3 4 60-79%

1, 2, 3, 4 5 80-99%

1, 2, 3, 4, 5 - End of charging, battery

pack 100 % charged

Operation

Switching battery pack on and off

Switching on the battery pack(26) is one of the options

for switching on the Brose e-Bike System.

− Press the LED button(28) on the battery pack(26).

→ The LEDs of the charge level display(27) come on

brieﬂy and then show the current charge level for

about 4 seconds.

N.B.: If the capacity of the battery pack (26) is below

10 %, only the ﬁrst LED of the charge level display(27)

ﬂashes.

− To switch off the battery pack (26), press the LED

button(28) for > 3 seconds.

→ The LEDs of the charge level display(27) go out.

→ The e-Bike System too is also switched off.

Operating modes of battery pack

Active Mode

After switch-on, the battery pack(26) is in the “Active

Mode”. It remains in the “Active Mode” for 2 hours wit-

hout any further action (operation or movement of the

e-Bike).

The “Active Mode” is activated by operating the LED

button(28), by charging the battery pack(26), or by in-

serting the battery pack(26) into the e-Bike.

Deep Sleep Mode

To minimize the power consumed by the system itself,

the battery pack (26) switches automatically to the

“Deep Sleep Mode” after 2 hours in the “Active Mode”

without any activity and with the display unit(1) swit-

ched off. The “Deep Sleep Mode” is also activated

when the LED button(28) or the On/Off button(8) of the

display unit(1) is pressed for > 3 seconds or when the

battery pack(26) is not inserted into the e-Bike for lon-

ger than 30 seconds.

Power reduction of battery pack

For self-protection against overloading or overheating,

the battery pack(26) has a function for automatic power

reduction depending on the charge level and tempera-

ture.

Above a cell temperature of 70°C, and between 0 and

10°C, the motor power is reduced in 4 stages (25 %

each) until the drive is switched off.

With a charge level of < 5 %, the drive assist is switched

off, so that the display unit (1) and the lights can be

operated for at least 4 more hours before the battery

pack(26) deactivates for self-protection.

Maintenance, cleaning and storage

Keep the battery pack(26) clean. Clean it carefully with

a soft and dry cloth. The battery pack(26) must not be

immersed in water or cleaned using a water jet. If the

battery pack(26) is no longer working, please contact

an authorized bicycle dealer. Set down the battery

pack(26) only on clean surfaces. Avoid in particular any

fouling of the charging sockets(30) and of the contacts.

The service life of the battery pack(26) can be extended

if it is looked after well and above all stored in the right

conditions:

Temperature 18-23°C

Humidity 0-80%

Charge level 70%

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brose e-Bike Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brose e-Bike

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info