Bedienungsanleitung Brother ADS-1700W (Seite 166 von 219) (Englisch)

718489

166

Zoom out

Zoom in

Vorherige Seite

1/219

Nächste Seite

Home > Troubleshooting > If You Are Having Difficulty with Your Machine > Network Problems > Your

Brother Machine Cannot Scan over the Network

Your Brother Machine Cannot Scan over the Network

Related Models: ADS-1700W

Cause Action

You did not select Accept in the

security alert dialog box during

the Brother Device installation,

applications’ start-up process,

or when using the scanning

features.

If you did not select Accept in the security alert dialog box, the firewall function of

your security software may be denying access. Some security software may block

access without showing a security alert dialog box.

To allow access, see your security software instructions or ask the manufacturer.

Your security software blocks

your machine's access to the

network. (The Network

scanning feature does not

work. )

• Windows

Configure the third-party Security/Firewall Software to allow Network scanning.

To add port 54925 for Network scanning, type the information below:

- in Name:

Type any description, for example Brother NetScan.

- in Port number:

Type 54925.

- in Protocol:

UDP is selected.

See the instruction manual that came with your third-party Security/Firewall

Software or contact the software manufacturer.

• Mac

Reinstall the driver.

Your security software blocks

your machine's access to the

network.

The following port numbers are used for Brother network features:

• Network scanning, Remote Setup

Port number 5566/Protocol TCP

• Network scanning (Brother iPrint&Scan)

Port number 54921/Protocol TCP

• BRAdmin Light

Port number 161/Protocol UDP

For information about how to open the port, see the security software instructions or

ask the manufacturer.

Your Brother machine was not

assigned an available IP

address.

Confirm the IP address and the Subnet Mask.

Verify that both the IP addresses and Subnet Masks of your computer and the

Brother machine are correct and located on the same network.

For more information about how to verify the IP address and the Subnet Mask, ask

your network administrator.

You cannot connect the Brother

machine to the network using

wireless capabilities.

• Press Settings > Network > WLAN > WLAN Status > Status. If the

LCD displays Connection Failed, ask your network administrator whether

your IP address is valid or not.

Because the machine does not

support Kerberos

authentication, Network

scanning cannot be used.

Change the server settings or change the destination folder where your document

will be stored in the Scan to Network Profile from Web Based Management.

If you have checked and tried all of the actions, but your Brother machine still cannot scan, uninstall the Brother

software and drivers and reinstall them.

162

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Brother ADS-1700W Seite 166

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Brother ADS-1700W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info